Hi ,
No, I have closed off my fuel tank covers.
I used the largest diameter bolt I could, I will guess a
AN-3, as far as the length goes , ( again a Guess ) perhaps a
-22A ?
Sorry I can't help you out any more , can you get the length from the
parts book and or the bolts you removed ??
Well I just went throught the same whole thing , I ordered the part number out of the parts book and from 2 diierant suppliers I got 2 differant bolts and both were not correct :( , so in the end, I used a bolt that was an AN ( I forget the size now ) that would go through the metal spacer in the en...
As my project is finally drawing to a close , I am looking at installing the Cessna secondary seat stop set-up. (Cessna service Bulletin SEB89-2.) I have the the Kit the parts and FAA approved Flight Manual Supplement, ( which includes 170 ser# 18000 thru 27169.) but no installation info ? ? :evil: ...
I have recently got a pair of Fli Lite 3000 mk III hyd wheel skis. I have a complete set of drawing for the C 170 instllation. My skis however are configured for either Piper or Maule insatllation, so I hve the wrong yokes and axels and cables.( so I am told.) Can anyone help me out?? I need, Cessna...
Hi, I am getting my 170B ser#20292 , CF-HER in the final stages after 3 years. :lol: My Mechanic wants to have the up to date manuals. My Parts book (D-138-1-13 ) is up to date with Temp Rev #2 in it :lol: , but my cessna service manual ( 62 and prior P108-12 ) only has temp rev # 1 :cry: Temp rev #...
Hi Nick,
Thanks for the reply. Thats just what I need as the shop can make it up out of .032 for far far less $$. This form just paid for another year or two worth of menbership fees !!! Any chance you or someone out there can sent me the measurements of there size ?
I am getting my 52 170 ser #20292 closed up by the maintenance shop. :D It was pointed out to me to-day that the rear horizontal bulkhead(pn 0512118-7 is missing the reinforcement doubler on the bulkhead part numbers 0512118-9 and -8. I checked the 170A parts book and it looks like it doesnot have t...
Thanks so much for the info ! :D $192.00 is better , but still hurts , it will change my plans , as I was saving up my allowance :? to try to get an alternator.:lol: Has the welding repair to the hinge been sucessful, I am a little shy of it as I can see the the metal has been flexing in and out as ...
Hi , I need a L/H upper door hinge , the forward one that attaches to the fuselage. pn 0511106-14. I know Cessna sells these but I can not do the + $600.00 they want. :evil: ANY help or leads would be greatly appreciated.:D Please call me @ 905 655 0625 or email me . John Atkins CF-HER 1952 C 170B 2...
I have read this posting, and then I looked up my 100 series Service Manual, 1962 and Prior. My book includes , revision #1 18 Oct. 1977. My research shows this as being the current service manual,for this model /year group of aircraft. In the forwad it states "this information can be used as a...
My mechanic questions the PK screws that hold the bottom cowl and the top cowl to the fuselage on my 52 170B . I have checked in the parts book , and to the best of my understanding , this seems to be original ????? Is there any history or comments of these PK screws being a problem ? He is suggesti...
Can anyone share experience / or recommendations on wether I should consider switching from my original airbox style engine baffles , to the pressure cowl style ? My A/C is a 1952 170B , sr 20292, my original baffles are in very poor condition and new ones will have to be frabricated , using the old...