Search found 21 matches
- Sat May 13, 2017 6:02 am
- Forum: The Hangar
- Topic: Looking for floats, (not 170)
- Replies: 0
- Views: 20569
Looking for floats, (not 170)
I recently bought a 185 and am looking for a good set of floats. I'm up in Homer AK. If any alaska guys know of any good 185 floats around it would be greatly appreciated!! Looking for EDO 3430's or PK 3500c's thanks Corey. 218-390-3680
- Tue Feb 23, 2016 4:16 am
- Forum: The Hangar
- Topic: Tires for awb 2500 skis
- Replies: 8
- Views: 8623
Re: Tires for awb 2500 skis
Thanks for the info, I've done all I could with adjustments and still can't quite make it. I shimmed the skis on the axles a little bit to gain some room, played with the rigger mounts and anything else I could see, I think if I didn't have the goodyears I would be fine. I only need about another 1/...
- Fri Feb 19, 2016 11:30 pm
- Forum: The Hangar
- Topic: Tires for awb 2500 skis
- Replies: 8
- Views: 8623
Tires for awb 2500 skis
Anybody running 800 tires with awb 2500 skis? I have Goodyear 8.50 x 6 and they will not work with the skis, the riggers hit the sidewall when skis are down, I need to order some 800's but don't know if the goodyears will be narrow enough. Does anybody have measurement of some different brand tires ...
- Tue Sep 22, 2015 5:13 am
- Forum: The Pilot Lounge
- Topic: Alaska to lower 48.
- Replies: 2
- Views: 5442
Alaska to lower 48.
Any members interested in making the trip from Alaska to the lower 48 ? I need to get my plane down there for the winter but had some issues at the border. I've made the trip a few times and could give info on the route and planning. Any other ideas would be greatly appreciated. I'm in Homer now but...
- Tue Jun 09, 2015 7:35 pm
- Forum: The Pilot Lounge
- Topic: Partsbase
- Replies: 2
- Views: 4944
Partsbase
Is anybody a member on parts base that could look up a couple of Edo part # 05505 and 05506
- Mon Jun 01, 2015 7:08 am
- Forum: The Hangar
- Topic: Yet Another Prop Question(s)
- Replies: 30
- Views: 31807
Re: Yet Another Prop Question(s)
If you want a cruise prop stick with the short one, if you want a climb prop get an 80", no comparison to the short props. I will never bolt on the short prop again. I get about 800-900fpm climb at gross wt. I am rumming an 8040. it's a little thin but performs good.
- Wed Sep 17, 2014 5:59 am
- Forum: The Hangar
- Topic: 8.50x 6 tires
- Replies: 4
- Views: 5655
8.50x 6 tires
I got "busted" for 8.50 x 6 tires last week in Palmer, what I got out of it is I need to produce a field approval for the single puck brake application or install double puck brakes which would be ok. Any info on this?
- Wed Sep 17, 2014 5:54 am
- Forum: The Hangar
- Topic: 170B float drawings
- Replies: 16
- Views: 12635
Re: 170B float drawings
Float kit drawings do not exist, I installed the parts in mine last winter, the best thing is to go look at one with floats and measure. The parts book is only helpful for part numbers. I can help you if you need it.
- Mon Jun 09, 2014 4:26 pm
- Forum: The Hangar
- Topic: Goodyear 26" tires
- Replies: 2
- Views: 2384
Goodyear 26" tires
Has anyone got a field approval for goodyear 26" tires? I just got a set and want to put them on.
- Mon Apr 14, 2014 4:48 pm
- Forum: The Hangar
- Topic: Aluminum engine mount bushings
- Replies: 31
- Views: 22002
Re: Aluminum engine mount bushings
By the way, i was still wondering if anyone has the dimensions, it would be greatly appreciated, otherwise I can just do some measuring and figuring.
- Tue Apr 08, 2014 2:31 pm
- Forum: The Hangar
- Topic: Aluminum engine mount bushings
- Replies: 31
- Views: 22002
Re: Aluminum engine mount bushings
Does anyone have the dimensions for these bushings so I can get some made?
- Tue Feb 25, 2014 2:09 am
- Forum: The Hangar
- Topic: Lifting eyes
- Replies: 1
- Views: 1921
Lifting eyes
I know I've seen the measurements for cutting the holes in the roof skin on here but now that I need them I can't find them.
- Tue Jan 14, 2014 2:44 pm
- Forum: The Hangar
- Topic: Federal awb 2500 ski installation
- Replies: 5
- Views: 3702
Re: Federal awb 2500 ski installation
I have all the 170 parts, looking for how and where the cables attatchment and plumbing
- Tue Jan 14, 2014 1:45 am
- Forum: The Hangar
- Topic: Federal awb 2500 ski installation
- Replies: 5
- Views: 3702
Federal awb 2500 ski installation
I just got a set of awb 2500 and am looking for some installation drawings and/ or advice.
- Tue Dec 17, 2013 10:27 pm
- Forum: The Hangar
- Topic: float kit install
- Replies: 9
- Views: 21628
float kit install
I'm going to start the install of my float kit and still need part #0541127 does anybody have one or a template to make one, i also need the lifting eyes and a v brace. The 0541127 is an angle on the bottom of the station 90 rib. Any tips and advice would be great, along with any install drawings if...