Search found 9 matches
- Mon Jun 28, 2021 1:33 pm
- Forum: The Hangar
- Topic: Landing gear wedges
- Replies: 23
- Views: 10560
Re: Landing gear wedges
That makes sense. Thank you!
- Sun Jun 27, 2021 9:27 pm
- Forum: The Hangar
- Topic: Landing gear wedges
- Replies: 23
- Views: 10560
Re: Landing gear wedges
Thank you for the input. Whoever did the gear the last time tried to make their own wedges from angle iron and failed miserably, so I would really like to purchase the correct ones. I understand that it will be expensive but I would rather ensure that it's correct. Is there any documentation that th...
- Sun Jun 27, 2021 1:03 am
- Forum: The Hangar
- Topic: Landing gear wedges
- Replies: 23
- Views: 10560
Landing gear wedges
I'm looking for a source for the 0441115 wedges and the 0541105 shims, but I'm coming up dry except for used ones. Does anyone know of a source for these parts?
Thank you,
Thank you,
- Sun Feb 19, 2017 11:19 pm
- Forum: The Hangar
- Topic: Blue Sky door latch
- Replies: 9
- Views: 15895
Re: Blue Sky door latch
I'm thinking it's a minor alteration also, but my IA disagrees. I do need to repair the door as the original spring setup has actually broken and cracked the door. Seems like the Blue Sky arrangement would distribute the strain and probably last longer than putting the spring back in. Thanks for all...
- Thu Feb 16, 2017 5:10 pm
- Forum: The Hangar
- Topic: Blue Sky door latch
- Replies: 9
- Views: 15895
Re: Blue Sky door latch
I don't disagree, but choking on the cost of them right now.
- Wed Feb 15, 2017 6:14 pm
- Forum: The Hangar
- Topic: Blue Sky door latch
- Replies: 9
- Views: 15895
Blue Sky door latch
Has anyone used the Blue Sky door latch (to hold the door open). The spring latch on our 170 has broken the sheet metal at the door and before I do the repair and duplicate the original I'm wondering if anyone has any better ideas. I'm thinking I could get a field approval on the Blue Sky fix. Thanks,
- Fri Apr 22, 2016 4:54 pm
- Forum: The Pilot Lounge
- Topic: CFI List
- Replies: 2
- Views: 5776
CFI List
So we took the plunge and are buying a 170. Trouble is that while my wife has tail dragger endorsement, I don't. Anyone know of a good tail wheel CFI in North-Central PA? Can use our AC. It will be hangered in Williamsport, but no available CFI's around that I have been able to find yet. Thanks in a...
- Thu Apr 14, 2016 2:11 am
- Forum: The Hangar
- Topic: Looking for a PreBuy in MD
- Replies: 2
- Views: 3217
Re: Looking for a PreBuy in MD
OK, That's not too far. Actually meeting the seller at Chester County again this weekend.
Thank you!
Thank you!
- Mon Apr 11, 2016 4:51 pm
- Forum: The Hangar
- Topic: Looking for a PreBuy in MD
- Replies: 2
- Views: 3217
Looking for a PreBuy in MD
Looking at a very early 170 in MD and would like someone knowledgeable to do a pre-buy inspection. Also would really appreciate any input on issues to look out for on the older 170's.
Thanks!
Stu K.
Thanks!
Stu K.