Search found 125 matches
- Fri Dec 19, 2008 5:52 am
- Forum: The Hangar
- Topic: Door Seal
- Replies: 52
- Views: 149941
Re: Door Seal
The best door seal / weatherstrip I've found to replace the original is: Brown Aircraft T-9088 . (Some mfr's call it "Piper" door seal, but don't let that fool you. It's what Cessna used.) My 140 still has the original door seal retainer and I don't think this shape will work with it. The...
- Fri Dec 12, 2008 5:17 am
- Forum: The Hangar
- Topic: ALERT: Failed Landing Gear Spring Strut (ACS)
- Replies: 21
- Views: 199928
Re:
1. The 120/140 manual lists a "right" leg for later serials, but no Left? It's there. Better late then never :) The left side spring is listed up higher in the figure 26 parts list, last item 26-14 for the later serial numbers. 0441149, the -1 is the right side. Took me a couple minutes o...
- Fri Dec 12, 2008 4:23 am
- Forum: The Hangar
- Topic: Door Seal
- Replies: 52
- Views: 149941
Re: Door Seal
The best door seal / weatherstrip I've found to replace the original is: Brown Aircraft T-9088 . (Some mfr's call it "Piper" door seal, but don't let that fool you. It's what Cessna used.) My 140 still has the original door seal retainer and I don't think this shape will work with it. The...
- Thu Dec 11, 2008 1:24 pm
- Forum: The Hangar
- Topic: Door Seal
- Replies: 52
- Views: 149941
Re: Door Seal
Bill has run out of the door seal finally and we're in the middle of procuring another run, if anyone needs some chime in over at the 120/140 site. http://www.cessna120-140.org
tye
tye
- Thu Feb 07, 2008 2:28 am
- Forum: The Pilot Lounge
- Topic: What Mistress Would You Pick?
- Replies: 50
- Views: 25532
Top two on the list. Trying to figure out which to court first. The 195 will fit in the hangar with the 140 better. 1. Cessna 195 2. Stearman Near the top of my bucket list is getting type rated in the DC3. Love that airplane. Though, I have yet to meet an airplane I didn't like. AC-130 for prairie ...
- Tue Sep 18, 2007 4:19 am
- Forum: The Hangar
- Topic: CAR 3 and tires, BIG TIRES
- Replies: 6
- Views: 4510
- Mon Sep 17, 2007 2:33 am
- Forum: The Hangar
- Topic: CAR 3 and tires, BIG TIRES
- Replies: 6
- Views: 4510
- Tue Sep 04, 2007 2:05 am
- Forum: The Pilot Lounge
- Topic: Winning 170A
- Replies: 23
- Views: 15020
- Sun Aug 19, 2007 3:24 am
- Forum: The Pilot Lounge
- Topic: Modeler Seeking 170B 1952 Info
- Replies: 31
- Views: 18992
- Thu Aug 09, 2007 4:00 am
- Forum: The Pilot Lounge
- Topic: Compass interference from windshield V-brace attach bolts
- Replies: 17
- Views: 12174
Stainless steels can exhibit magnetism from next to none, to strong depending on the alloy, how it's been formed, and/or heat treated. 300 series CRES that's been cold worked can be weakly magnetic. 400 series CRES can be strongly magnetic. 400 series can also rust. CRES actually forms a surface fil...
- Mon Jul 30, 2007 5:51 pm
- Forum: The Pilot Lounge
- Topic: Pitot Static
- Replies: 9
- Views: 6264
If I thought my IA wasn't paying close attention to the entire airplane during an annual, including all the vacuum system hoses and everything else he sees under/behind the panel, I'd be shopping for a new IA. If he saw or ran into something that was outside his experience I know he'd recommend a vi...
- Wed May 23, 2007 3:09 am
- Forum: The Hangar
- Topic: Cessna Service bulletins,
- Replies: 1
- Views: 2706
Re: Cessna Service bulletins,
J On the other hand a court of law in a civil suit can determine that a mechanic is liable for having not complied with a SB even if it is not Mandatory According to the FAA. I'd have thought the owner is responsible for complying with an SB, or not. Even though a mechanic may perform the activity,...
- Sun May 20, 2007 3:57 am
- Forum: The Hangar
- Topic: Advice on Tearing Down - Storing Engine Parts
- Replies: 10
- Views: 4525
Re: What is "buther" paper?
"butcher" paper maybe.CBogle wrote:George:
What is buther paper?
Thanks for the advice...I'll follow it.
Curt
- Fri May 18, 2007 11:50 pm
- Forum: The Hangar
- Topic: Cessna SEB07-5 "Compliance is mandatory?"
- Replies: 5
- Views: 6541
- Wed May 16, 2007 5:02 pm
- Forum: The Pilot Lounge
- Topic: Hatz Trim systems (Cub or other alternatives)
- Replies: 10
- Views: 6485