Does anyone know where a guy could find a tail wheel eye bolt #0642105?
Air Repair does not have this exact item and is offering part #0642161-1 as an alternate option but would prefer the above.
Search found 7 matches
- Fri Oct 27, 2023 3:33 pm
- Forum: The Hangar
- Topic: Main Tailwheel Leaf Spring Comparison
- Replies: 16
- Views: 41090
- Fri Apr 28, 2023 3:35 pm
- Forum: The Hangar
- Topic: Sprung gear leg
- Replies: 13
- Views: 5184
Re: Sprung gear leg
I recently replaced the stock gear on my '51 170A with 180 gear legs. They were/are in serviceable condition as far as I know. If someone needs a set, don't be shy to reach out. I'm willing to offer a decent deal for a fellow member.
- Fri Feb 05, 2021 4:25 am
- Forum: The Hangar
- Topic: SCS interiors
- Replies: 2
- Views: 1920
Re: SCS interiors
Hi Andy,
I re did the interior on my '51 this fall and ordered the pre cut carpet. Fit was good, nice quality product. Let me know if you have any specific questions.
I re did the interior on my '51 this fall and ordered the pre cut carpet. Fit was good, nice quality product. Let me know if you have any specific questions.
- Thu Dec 24, 2020 3:36 pm
- Forum: The Hangar
- Topic: Federal AWB 2500 Rigging
- Replies: 6
- Views: 2311
Re: Federal AWB 2500 Rigging
I think you need full member access to view that section of the forum.SethR wrote:Mitch,
I'm unable to view the link-
- Tue Dec 22, 2020 2:59 pm
- Forum: The Hangar
- Topic: Federal AWB 2500 Rigging
- Replies: 6
- Views: 2311
Re: Federal AWB 2500 Rigging
Most of that info is here I believe, 3rd post from the bottom of page 2 ----> viewtopic.php?f=31&t=9329&start=15
- Wed Jul 01, 2020 2:18 pm
- Forum: The Hangar
- Topic: Door Handle Assembly
- Replies: 2
- Views: 3191
Re: Door Handle Assembly
Correct, my aircraft is a '51 170A. I think I'll try drilling out the dimple, as that's how it was originally. Thanks for your help Gary!
- Thu Jun 25, 2020 4:51 pm
- Forum: The Hangar
- Topic: Door Handle Assembly
- Replies: 2
- Views: 3191
Door Handle Assembly
We are currently working on my door handle assembly and am hoping for a bit of help. The bracket in the door that the handle spline sits in, is it supposed to have a hole in it? The top one is the NOS bracket I found (PN 0511106-30), and below is my existing one which was quite worn. Has the old one...