Search found 163 matches
- Tue Mar 14, 2023 3:47 pm
- Forum: The Hangar
- Topic: Alternator Upgrade
- Replies: 16
- Views: 82351
Alternator Upgrade
I want to upgrade my 56' 170b from the old lower-power 20amp Delco Remy generator to a new alternator to provide more power. I'm looking for advice on which alternator to order from ACS and what other parts/accessories will be required. Obviously, I need an alternator, but what else? - Voltage regul...
- Thu Feb 16, 2023 1:42 am
- Forum: The Hangar
- Topic: Oil Pan Heater Pad
- Replies: 11
- Views: 10647
Oil Pan Heater Pad
I live in Canada, it can get cold. My hangar isn't heated and I'd like a way to keep the oil warm throughout the winter so I can just fire up and go, without excessive warm up or putting a hair dryer in my cowling for hours. Anyone have experience with these? https://www.aircraftspruce.ca/catalog/ep...
- Tue Nov 29, 2022 9:41 pm
- Forum: The Hangar
- Topic: Alternator STC
- Replies: 35
- Views: 65217
Re: Alternator STC
I'm on my third generator in three years. What a piece of garbage. I'll be upgrading to an alternator next time it fails. I have a 20amp Delco Remy generator. It ALWAYS leaks. I've had one fail completely, and the second generators drive draft stripped after only 20 hours rendering it useless. Right...
- Tue Nov 08, 2022 3:35 am
- Forum: The Hangar
- Topic: Generator Light Issue
- Replies: 3
- Views: 2107
Generator Light Issue
Tonight in cruise flight, the generator indicator light on my panel turned red, indicating the generator was not working at cruise power which is usual. However, my ammeter was still showing a positive deflection with most of my electrical system/lights on—this gave me conflicting messages. I decide...
- Thu Oct 06, 2022 4:03 pm
- Forum: The Hangar
- Topic: O300 Baffles
- Replies: 2
- Views: 1684
O300 Baffles
I'm looking for new port & starboard baffles for my O300. My baffles are cracked from heat & vibration, and when I took them off to do some engine work, many of the mounting holes cracked right off like dry crackers. Are these the correct ones to order? Specifically— AF0550164-8 AF0550164-7 ...
- Thu May 12, 2022 7:39 pm
- Forum: The Hangar
- Topic: Leaking Compass
- Replies: 15
- Views: 9511
Re: Leaking Compass
Topped it up with fluid and a repair kit, good as new.
I'm assuming there was no radioactive elements in the compass, as the last service date was 1990.
Not glowing green
I'm assuming there was no radioactive elements in the compass, as the last service date was 1990.
Not glowing green
- Tue May 10, 2022 3:50 am
- Forum: The Hangar
- Topic: Leaking Compass
- Replies: 15
- Views: 9511
Re: Leaking Compass
Buy the Spruce repair kit. Submerge the compass in a bowl of fluid to allow the bubbes to escape before your close it up.. Lasts another 20 years and no operational issues. (Worked for me on several different airplane compasses and despite the criticism of purists, have had zero problems.Before 197...
- Tue May 10, 2022 12:52 am
- Forum: The Hangar
- Topic: Leaking Compass
- Replies: 15
- Views: 9511
Leaking Compass
My compass started leaking fluid onto my panel.
I removed the face cover from the compass, and it looks like the gasket/seal inside the compass popped off.
Am I able to repair the compass with new seals and top up with fluid? If so, which seals and fluid do I purchase?
Thanks
I removed the face cover from the compass, and it looks like the gasket/seal inside the compass popped off.
Am I able to repair the compass with new seals and top up with fluid? If so, which seals and fluid do I purchase?
Thanks
- Mon Apr 25, 2022 4:56 pm
- Forum: The Hangar
- Topic: Door Keeps Opening - Bolt/Latch Worn
- Replies: 4
- Views: 3120
Re: Door Keeps Opening - Bolt/Latch Worn
Reese. most of the time a door opening is an indicator that that spring that is suppose to keep the latch out holding the door closed, is broken. Despite you taking a very nice close photo of the latch, I can't see a spring at all on your latch which is somewhat unusual unless the spring has comple...
- Mon Apr 25, 2022 4:10 pm
- Forum: The Hangar
- Topic: Door Keeps Opening - Bolt/Latch Worn
- Replies: 4
- Views: 3120
Door Keeps Opening - Bolt/Latch Worn
My door latch is significantly worn on my 56 170b, and my door pops open at every hint of turbulence and on all landings. The handle mechanism still works well, but the bolt/latch is worn. The strike plate looks fine. Is there a replacement part available to swap out the worn bolt/latch, or do I hav...
- Fri Mar 04, 2022 4:07 pm
- Forum: The Hangar
- Topic: Broken CHT - Replacement?
- Replies: 6
- Views: 5405
Re: Broken CHT - Replacement?
Thanks for this. You can see my Q's to GAhorn abovebgiesbrecht wrote:Agreed, in my experience it is common for the gasket-style probe to fail especially after working on the plugs. I would start with simply replacing the gasket probe after checking the harness connections.
- Fri Mar 04, 2022 4:06 pm
- Forum: The Hangar
- Topic: Broken CHT - Replacement?
- Replies: 6
- Views: 5405
Re: Broken CHT - Replacement?
Two questions—GAHorn wrote:The gauge can be tested. The probe is the most common failure after harness integrity has been confirmed.
1. How do I test the gauge?
2. P/N for new probe?
I inspected the harness. It's old, but looks OK
- Fri Mar 04, 2022 5:16 am
- Forum: The Hangar
- Topic: Broken CHT - Replacement?
- Replies: 6
- Views: 5405
Broken CHT - Replacement?
My CHT gauge stopped working in flight today, and I'm looking for a replacement/repair. My AME and I took the system apart, but couldn't see any broken wires or obvious signs. I'm not sure if it's the gauge, wires, or probe—impossible to know without replacing each piece independently. I figure it's...
- Wed Mar 02, 2022 3:27 am
- Forum: The Hangar
- Topic: Tailwheel spring corrosion
- Replies: 27
- Views: 13356
Re: Tailwheel spring corrosion
Reece, I can not recommend you buy a whole new set. Due to time loss of manufacturing specs have gotten muddy as well as material availability has lead to considerable thickness variances of the springs you will receive today. Unfortunately I would give your chances of receiving a new spring pack t...
- Thu Feb 10, 2022 4:18 am
- Forum: The Hangar
- Topic: Tailwheel spring corrosion
- Replies: 27
- Views: 13356
Re: Tailwheel spring corrosion
ThanksGAHorn wrote:Leafsprings: https://www.aircraftspruce.com/catalog/ ... ey=3010020
Steering springs: https://www.aircraftspruce.com/catalog/ ... ey=3010020