Search found 1295 matches

by ghostflyer
Thu Nov 02, 2023 12:00 am
Forum: The Hangar
Topic: 2 1/4" instruments on the stationary sub panel
Replies: 8
Views: 86951

Re: 2 1/4" instruments on the stationary sub panel

Dave,
Just tried your method and it works great . Thank you for that .
by ghostflyer
Wed Nov 01, 2023 11:49 pm
Forum: The Pilot Lounge
Topic: EAA - FAA Program Enables Using Some Off-The-Shelf Parts In
Replies: 6
Views: 16482

Re: EAA - FAA Program Enables Using Some Off-The-Shelf Parts In

In my part of the world [Australia]when I questioned our authorities about VARMA , the answer I received was [very open ended] , [Their words]. If it looks like a duck , waddles like a duck ,has a duck bill , it’s must be a duck BUT you [approved engineer]must sign off on it as being fit for purpose...
by ghostflyer
Mon Oct 30, 2023 4:26 am
Forum: The Pilot Lounge
Topic: Potential New Caretaker of C-170B
Replies: 3
Views: 15639

Re: Potential New Caretaker of C-170B

Chris, Welcome to the association , there is a large amount of knowledge and talent in this group. Besides having a web page and forum there is a convention each year changing to a different location each year. plus numerous fly ins . If you have a question ,someone some where will have an answer . ...
by ghostflyer
Mon Oct 30, 2023 4:11 am
Forum: The Pilot Lounge
Topic: FAA VARMA program
Replies: 1
Views: 18116

FAA VARMA program

As no one has mentioned it so far but it’s important development . The FAA has introduced a VARMA Article which covers our aircraft . VARMA means “Vintage Aircraft Replacement and Modification Article . This applies to aircraft less than 12,500 lbs and made before 1980. Plus other conditions which a...
by ghostflyer
Sat Oct 28, 2023 5:08 am
Forum: The Hangar
Topic: 2 1/4" instruments on the stationary sub panel
Replies: 8
Views: 86951

Re: 2 1/4" instruments on the stationary sub panel

I have fitted the EI small digital instruments and found them to be very accurate and worth every penny. Yes I had some issues [not EI fault] but they really came to the party. When things get ugly ,the instruments have a very bright warning lights that catch your attention. Plus they self test ever...
by ghostflyer
Fri Oct 27, 2023 7:20 am
Forum: The Pilot Lounge
Topic: check out u tube
Replies: 6
Views: 147867

check out u tube

On U tube there is a channel called “Skywagon university” and they have a comparison between Cessna 170B and a Cessna 180. His facts are pretty spot on but his cameras failed in the cockpit during the flights . It’s worth watching .
by ghostflyer
Fri Oct 20, 2023 3:22 am
Forum: The Hangar
Topic: Craftsman hand-tool warranty
Replies: 18
Views: 274949

Re: Craftsman hand-tool warranty

Maybe he isn’t using it enough.
by ghostflyer
Fri Oct 20, 2023 3:20 am
Forum: The Hangar
Topic: Vibration problem
Replies: 13
Views: 23373

Re: Vibration problem

you also stated that the “Water” in the compass was.. Compasses have alcohol in them or a special compass oil. I worked in a shop where they used “Johnny Walker “ scotch whisky or “JimBeam”. The bottle on the shelf was for instrument purposes only but it evaporated by itself . Strange …
by ghostflyer
Fri Oct 20, 2023 3:00 am
Forum: The Pilot Lounge
Topic: According to some “Taildraggers Suck”.
Replies: 11
Views: 100100

Re: According to some “Taildraggers Suck”.

When I have taken passengers for a fly and they remark that was a good landing , my response is “ yes , I had my eyes closed “.
by ghostflyer
Wed Oct 04, 2023 12:50 am
Forum: The Pilot Lounge
Topic: Mixture cable part number
Replies: 2
Views: 12457

Re: Mixture cable part number

I have had the same problem,my mixture cable broke also. I was over 700 miles from home . Contacted McFarlane by phone and they sent one to my hotel . Great service , I had the cable in 48 hours from the USA to the middle of Australia . It did cost me plenty. But a great product. Not hard to fit. PS...
by ghostflyer
Tue Sep 26, 2023 3:27 am
Forum: The Hangar
Topic: Airworx 180HP O-300 STC
Replies: 57
Views: 325471

Re: Airworx 180HP O-300 STC

many years ago we fitted a “kit” from continental to increase the power output to our O-300 engine . there wasn’t any approval issued and was “going” to be a experimental . The cylinders were ported and polished and the pistons I think were C85 types. the carburettor jetting was made richer [ a new ...
by ghostflyer
Sun Sep 10, 2023 1:26 am
Forum: The Pilot Lounge
Topic: Loss of control w/electronic attitude indicators
Replies: 7
Views: 68227

Re: Loss of control w/electronic attitude indicators

The Garmin G3x is a great stable instrument[system ] and a back up that has least issues is a garmin G5. There is a recall on G5 batteries but Garmin has that under control.
by ghostflyer
Tue Sep 05, 2023 9:59 pm
Forum: The Hangar
Topic: Gear Curiosity?
Replies: 7
Views: 36661

Re: Gear Curiosity?

with reference to the gear with the AN310 nuts , they have split pins fitted in the photo . However I have never seen an approved method of attachment like this . Hopefully the correct bolts were used .
by ghostflyer
Tue Sep 05, 2023 12:00 am
Forum: The Pilot Lounge
Topic: Loss of control w/electronic attitude indicators
Replies: 7
Views: 68227

Re: Loss of control w/electronic attitude indicators

OMG this is one lucky guy, It’s a wonder the aircraft didn’t break up in flight . I think Garmin has a lot to answer for this situation. Not wishing to start rumours but this is not the first time I have heard of a similar situation with this instrument . I am under the impression it doesn’t like vo...
by ghostflyer
Wed Aug 30, 2023 11:20 pm
Forum: The Hangar
Topic: Question for the Mechanics
Replies: 35
Views: 106344

Re: Question for the Mechanics

As George mentioned , use your own cylinders for overhaul as the history of cylinders from an engine overhauler isn’t known . A lot of cylinders are changed for various reasons . Some cylinders are repaired due to cracking and the new owners are not told of the amount /type of repairs carried out . ...