The International Cessna 170 Association

Truck mudflaps of rubber style are also reinforced and cut size.

John

I talked to the owner - Steve Schwister about the STC for our 170's. He told me that the approval for the planes [48 - 56] should be cleared by November.

http://trickair.com/products/

John

My 48 has pipe threaded drains. Buy them at Oshkosh for carrying extras.

I want to thank all the airport personnel at Newton [EWK} for all their help and also to all the convention people that made it a great convention. Since this year was a special year it was great to go to the old Cessna factory for the picture of homecoming. The flyouts were great and Mark and I put...

Leaving tomorrow 6/4 hoping weather holds for the flight.

What I don't like about the uAvionix is that it senses the transponder by it's wiring antenna and the GDL82 senses directly from the transponder in line. I like direct sensing for positive results.
I am installing the GDL82.

John

Check your crankcase vent so as not to build pressure in the block.

John

I think Reposition. Just to get a plane where it needs to be.

John

These people do all old and new instrument repairs.
http://www.keystoneinstruments.com/

http://www.airpartsoflockhaven.com/

Cables I have made at a local automotive speedometer shop.

John Hess

I use a light spray grease. Run from end to end as you lube.

John

EAA Fly-In breakfast at Deck [9D4] airport at 398 S Ramona Rd, southwest of Myerstown, PA
June 20th. 8AM to 11AM
We are registering Young Eagles (8-18) for a flight introduction to aviation.
Call 717-865-4642 or http://www.390.eaachapter.org/events.htm for more info.

John

Check you local auto parts for old cars and pickups. I can't tell you which ones but many had a fill like our planes.

John

I have a Century to install for some years and due to the "48" style cableing, I couldn't install without Mineral Wells doing some high tech testing. It seems that the "48's" with the cables up the back center are so easy to access but never STC'd, but the later models with the c...

As Bruce said, check the scat hose from firewall to heater plenum. Mine was full of holes and shot. In the cabin the tunnel has sliding port holes at the front of your feet. Check to see if they are open and not covered. My panel lights have the squeeze and tension bulb holders and I got mine to wor...

I am also glad that I have it for quite a while.

John