ragwing trim colors.
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
-
3958v
- Posts: 545
- Joined: Tue Apr 23, 2002 12:00 am
ragwing trim colors.
Does anyone have an old color picture or brochure which would show the colors of the wing numbers, tail number and the cessna 170 logo on the tail of a 48 170. I am in the process of recovering the wings and doing a paint job on my bird and trying to make it as original as possible. Bill K.
Polished 48 170 Cat 22 JD 620 & Pug
-
zero.one.victor
- Posts: 2271
- Joined: Tue Apr 23, 2002 12:11 am
ragwing colors
There was a post about this not too long ago.It mighta been the old yahoo site. I looked thru the posts here & couldn't find it.
Supposedly,all ragwings were polished aluminum with painted trim,the trim either being green or red. I assume the logo on the tail matched the rest of the trim,don't know if the registration numbers did also or not.
Eric
Supposedly,all ragwings were polished aluminum with painted trim,the trim either being green or red. I assume the logo on the tail matched the rest of the trim,don't know if the registration numbers did also or not.
Eric
Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.