48 IPC Error - Aileron Pulleys

How to keep the Cessna 170 flying and airworthy.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

48 IPC Error - Aileron Pulleys

Postby gobrien » Fri Apr 24, 2020 10:07 am

Minor issue in the parts catalog for the 1948. On Fig 42 the order of items 42-9 and 42-10 are reversed on the diagram.

I thought it odd that it went 8->10->9 on the picture and then spent an hour figuring out why the AN4-42A bolts in the table didn't match what I took out AN4-15! :oops: In fairness the ones I took out should be AN4-14A rather than drilled AN4-15 with bonus washers, which helped the confusion a little! Note to self, next time order everything from the IPC *before* taking anything out of the aircraft!

Might save someone some time.

48 IPC Error.png
1948 170 Project (N4180V) now EI-AEN S18513 - Dublin, Ireland
https://www.taildragger.eu/
User avatar
gobrien
 
Posts: 82
Joined: Sun May 19, 2019 11:36 am

Return to The Hangar

Who is online

Users browsing this forum: No registered users and 11 guests