Master cylinder mounting brackets
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
-
- Posts: 37
- Joined: Wed May 06, 2020 6:48 am
Master cylinder mounting brackets
My right side brackets broke on the 170, where the master cylinder bolts to the tunnel. I show 0411549 and 0411550 as the replacement, I see reports of either aluminum or steel, but they have the same p/n. Anyone bend these from .040 steel or similar? My bracket is in pieces unfortunately.
'53 B-model SN:25712
Re: Master cylinder mounting brackets
I fabricated brackets out of SS sheet about 35 years ago, just used the broken one as a pattern. Still going strong.alaskan9974 wrote:My right side brackets broke on the 170, where the master cylinder bolts to the tunnel. I show 0411549 and 0411550 as the replacement, I see reports of either aluminum or steel, but they have the same p/n. Anyone bend these from .040 steel or similar? My bracket is in pieces unfortunately.
Ed Booth, 170-B and RV-7 Driver