I live in the mild climate of coastal British Columbia where it rarely gets below freezing. That said, my oil temp will not go into the green for no matter how long I fly. The usual outside air temps are typically above 5ºC. It hovers right in the middle of the yellow temp arc.
Today, I saw another 170 and it had a piece of metal covering the oil pan air intake on the front of the cowling. I did some researching through the forums and it looks like others have made similar covers in the past.
My question(s) are—
Has anybody made an extra one of these they'd be willing to sell? I don't have access to metal fab equipment.
OR
Is there a template? I have a 172 cowling
What's the temperature range where this cover is needed? The one I saw today read 'remove above 15ºC'
In the interim, I'm going to cover it with Gorilla tape and see if it warms up the oil.
Winter Cowling Cover
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
-
- Posts: 165
- Joined: Tue Jan 05, 2021 1:34 am
- Bruce Fenstermacher
- Posts: 10318
- Joined: Tue Apr 23, 2002 11:24 am
Re: Winter Cowling Cover
Reese, I'll send you an email with info
CAUTION - My forum posts may be worth what you paid for them!
Bruce Fenstermacher, Past President, TIC170A
Email: brucefenster at gmail.com
Bruce Fenstermacher, Past President, TIC170A
Email: brucefenster at gmail.com
Re: Winter Cowling Cover
Reece... I was just going to post for you to contact Bruce Fenstermacher... and,... well.... there ya’ go!
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.