This is one of the better vids I’ve seen demonstrating boroscoping cyls and valves.
https://www.youtube.com/watch?v=Dk5o4__0y-4
Excellent Video about cylinders and valves
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
Excellent Video about cylinders and valves
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
Re: Excellent Video about cylinders and valves
Yes, this is actually better than the other one you posted. Thanks again George.
Karl
'53 170B N3158B SN:25400
ASW-20BL
'53 170B N3158B SN:25400
ASW-20BL
Re: Excellent Video about cylinders and valves
Borescoping. You’re scoping a bore.
Sorry if I’m a bore to care about spelling.
Sorry if I’m a bore to care about spelling.
Re: Excellent Video about cylinders and valves
Excellent video, learned a lot with this one, thanks George.
John E. Barrett
aka. Johneb
Sent from my "Cray Super Computer"
aka. Johneb
Sent from my "Cray Super Computer"
Re: Excellent Video about cylinders and valves
The more you do it the better you will get, the limitation is really the equipment. Boro of a cylinder is easy, unlikely you will get lost maybe interpreting the results a bit harder. Resolution is everything.
Jim McIntosh..
1953 C170B S/N 25656
02 K1200RS
1953 C170B S/N 25656
02 K1200RS
Re: Excellent Video about cylinders and valves
Come on, Jim, help me out here!c170b53 wrote:Boro of a cylinder is easy
Borescope
Borescope
Borescope