Gear leg fillet

How to keep the Cessna 170 flying and airworthy.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
User avatar
Joe Moilanen
Posts: 596
Joined: Sun Dec 28, 2003 5:45 am

Gear leg fillet

Post by Joe Moilanen »

Not that it would be hard to make one, but I was curious if anyone knew of a source for the rubber landing gear "fillet" (P/N 0511125) that seals off the gear leg where it exits the fuselage? TIA!

Joe
4518C
Metal Master
Posts: 526
Joined: Thu Dec 02, 2004 1:52 am

Re: Gear leg fillet

Post by Metal Master »

Hi joe,
I mentioned your name to Wayne out at Thun last week.
I use cut out pieces of innertube.
Regards,
Jim
A&P, IA, New owner C170A N1208D, Have rebuilt some 50 aircraft. So many airplanes, So little time!
User avatar
dstates
Posts: 472
Joined: Sun Jun 30, 2019 5:50 pm

Re: Gear leg fillet

Post by dstates »

N1235D - 1951 170A - SN: 20118
User avatar
Joe Moilanen
Posts: 596
Joined: Sun Dec 28, 2003 5:45 am

Re: Gear leg fillet

Post by Joe Moilanen »

Metal Master wrote:Hi joe,
I mentioned your name to Wayne out at Thun last week.
I use cut out pieces of innertube.
Regards,
Jim
Thanks Jim, that's probably what I'll do.

Joe
Post Reply