Looking for drawings to install TC approved EDO 2000 floats on a 170B. TC makes reference to Drawing #0541125B. Anyone have these drawings that I could buy a copy of ?
Thanks,
Greg V
EDO 2000 drawings
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
Re: EDO 2000 drawings
Greg,
drawing 0541125 (without the “B”) is in the Maintenance Library which requires membership to access.
drawing 0541125 (without the “B”) is in the Maintenance Library which requires membership to access.
Gary
Re: EDO 2000 drawings
Be aware that the oil “gauge rod” (dipstick) will be in error if a landplane is placed on floats. This thread discusses it: viewtopic.php?f=24&t=14167&p=133560&hil ... od#p133560
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
-
- Posts: 6
- Joined: Sat Jan 19, 2019 12:44 am
Re: EDO 2000 drawings
Was the same on my 180 when on floats. I etched a faint line for “normal” to pseudo calibrate.GAHorn wrote:Be aware that the oil “gauge rod” (dipstick) will be in error if a landplane is placed on floats. This thread discusses it: viewtopic.php?f=24&t=14167&p=133560&hil ... od#p133560
Thanks for the reminder!
SQRHD
GV
-
- Posts: 6
- Joined: Sat Jan 19, 2019 12:44 am
Re: EDO 2000 drawings
According to the TC (Note: 209), drwg# 0541125B is required for 170B’s (weight & balance wise). And I am a member, so I can access this, correct?n2582d wrote:Greg,
drawing 0541125 (without the “B”) is in the Maintenance Library which requires membership to access.
Thanks,
SQRHD
GV
Re: EDO 2000 drawings
We often find forum “participants” who believe by their participation in the free, Public areas of the Forums, that they are “Members” of the 170 Assoc’n.SQUAREHEAD wrote:According to the TC (Note: 209), drwg# 0541125B is required for 170B’s (weight & balance wise). And I am a member, so I can access this, correct?n2582d wrote:Greg,
drawing 0541125 (without the “B”) is in the Maintenance Library which requires membership to access.
Thanks,
SQRHD
But, Only bona fide, paid Members of The Int’l Cessna 170 Assoc’n may access the non-public areas of our Forums such as the Mx Library, Members Intercom, and post Ads in The TradeMart.
You may join at the Home Page. https://cessna170.org/register/
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.