High CHTs

How to keep the Cessna 170 flying and airworthy.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

User avatar
c170b53
Posts: 2527
Joined: Mon Apr 22, 2002 8:01 pm

Re: High CHTs

Post by c170b53 »

I have a bunch of that stuff, acquired along the way and I should really just chuck it. Electronics International is the stuff I use and zero problems.
Jim McIntosh..
1953 C170B S/N 25656
02 K1200RS
User avatar
DaveF
Posts: 1516
Joined: Sat Nov 03, 2007 1:44 am

Re: High CHTs

Post by DaveF »

The problem with Alcor gauges is that they use galvanometer movements, where the needle position is proportional to current. But thermocouples are voltage-output devices, so the gauge calibration depends on the total resistance of the probe, connectors, wire, and gauge internal calibration resistor.
Post Reply