Airworx sump repair -HVOC repair of Small TCM cranks

How to keep the Cessna 170 flying and airworthy.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
User avatar
Bruce Fenstermacher
Posts: 10313
Joined: Tue Apr 23, 2002 11:24 am

Airworx sump repair -HVOC repair of Small TCM cranks

Post by Bruce Fenstermacher »

Airworx LLC We would like all of our o-300 customers to know that we have a repair for the oil sumps that get corroded so bad. We will be able to repair them back to a factory new condition with our repair process.
https://www.facebook.com/81267902880434 ... 0425237804
Airworx LLC
We now have the approved repair to do the small Continental crankshafts and repair them back to standard limits using HVOF repairs. We are the ONLY shop that can legally do this..
https://www.facebook.com/Airworx12j/pho ... 601512353/

Airworx seems to have a lot of interesting stuff going on/
CAUTION - My forum posts may be worth what you paid for them!

Bruce Fenstermacher, Past President, TIC170A
Email: brucefenster at gmail.com
User avatar
GAHorn
Posts: 20967
Joined: Fri Apr 12, 2002 8:45 pm

Re: Airworx sump repair -HVOC repair of Small TCM cranks

Post by GAHorn »

The FIRST link you povided does not provide any basis for approval.

The Second link does not apply to the O-300.

Neither link is at cexxna170org… but is at facebook which is not referenced in the thread.
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons. ;)
User avatar
mmcmillan2
Posts: 161
Joined: Sat Jul 04, 2020 9:30 pm

Re: Airworx sump repair -HVOC repair of Small TCM cranks

Post by mmcmillan2 »

FB comments by vendor say high velocity low temp filler for the magnesium sump. I’m looking into this for my O300A.
170B owner, KCFD, CFI(I), ATP Multi
Post Reply