Carb heat and mixture cable stabilization

How to keep the Cessna 170 flying and airworthy.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
1moretw
Posts: 38
Joined: Sat May 28, 2022 11:29 am

Carb heat and mixture cable stabilization

Post by 1moretw »

Does anyone have a pic to demonstrate how to properly stabilize the carb heat and mixture cables prior to the carb? On my bird, there is/was a small aluminum channel, about 4 inches long by inch wide with 1/8 th inch sides. We removed it about 4 months ago and were not bright enough to take pics although with everything else wrong with this bird, it may not have been correctly fastened anyway. Even a brief description would help so we can avoid re-inventing the wheel so to speak. Thanks
User avatar
GAHorn
Posts: 20967
Joined: Fri Apr 12, 2002 8:45 pm

Re: Carb heat and mixture cable stabilization

Post by GAHorn »

The IPC shows the original methods. Here is the B-model (you didn’t mention which model you have).
Attachments
CLICK TO ENLARGE
CLICK TO ENLARGE
CLICK TO ENLARGE
CLICK TO ENLARGE
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons. ;)
1moretw
Posts: 38
Joined: Sat May 28, 2022 11:29 am

Re: Carb heat and mixture cable stabilization

Post by 1moretw »

Dummy me! Now, why didn't I think of that. Thanks much. I guess frustration caused me to gasp for help like a drowning rat. Thanks again. MK
Post Reply