Convention

A place to relax and discuss flying topics.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
User avatar
Wyoming1
Posts: 31
Joined: Sat Nov 13, 2021 7:23 am

Convention

Post by Wyoming1 »

Are conventions ever held in the western states? I'd be interested in attending, but distance is a 'thing' for me. Time mostly.

Thanks.
User avatar
Bruce Fenstermacher
Posts: 10297
Joined: Tue Apr 23, 2002 11:24 am

Re: Convention

Post by Bruce Fenstermacher »

Here is the secret of how convention locations are picked. A member steps up and announces they'd like to host a convention at a location. That's it. Conventions have been held everywhere throughout the US. Usually, but not always the convention is held at or very near where the host lives but this is not always the case. Quite a few conventions have been hosted by members at a location clear across the country from where they live.

Of course there is a little more that goes into it. Hosting a convention is not a light task. Planning by the host can be a multi year preparation proposition. Besides 100 or more "friends" showing up for a week of activities the host must schedule and manage, it is the place the business and membership meetings of the Association are carried out. It is an important gathering towards the well being of the Association.

In years past we have been fortunate to have more than one host wanting to put on a convention in the same year. After presenting their idea to the membership at convention, at the membership meeting, the members present vote on which proposal to accept and usually try to accept all proposals hoping to push a host to another year which has been done but is not always feasible. Ideally the location of the convention would alternate between the east and west coast, north and south boarder and in the middle of the country.

Past convention sites:

1969 Wichita, KS
1970 Colorado Springs, CO
1971 Dayton, OH
1972 Ft. Worth, TX
1973 Rockton, IL
1974 Seattle, WA
1975 West Memphis, TN
1976 Ithaca, NY
1977 Edmonton, ALB
1978 Lakeland, FL
1979 Fresno, CA
1980 Milwaukee, WI
1981 Portland, OR
1982 San Antonio, TX
1983 Yellowknife, NWT
1984 Kansas City, MO
1985 Blakesburg, IA
1986 Manassas, VA
1987 San Diego, CA
1988 Fairbanks, AK
1989 New Haven, CT
1990 Ottawa, ONT
1991 Jennings, LA
1992 Marion, IA
1993 Lancaster, PA
1994 Roswell, NM
1995 Kalispell, MT
1996 Lake Guntersville, AL
1997 Seattle, WA
1998 Lakeland, FL
1999 Durango, CO
2000 Anchorage, AK
2001 Shelbyville, IN
2002 Las Vegas, NV
2003 Wilmington, NC
2004 Tehachapi, CA
2005 Dearborn, MI
2006 Kelowna, BC
2007 Galveston, TX
2008 Branson, MO
2009 Duluth, MN
2010 St. Joseph/Benton Harbor, MI
2011 San Diego, CA
2012 Longmont, CO
2013 Bardstown, KY
2014 Creve Coeur, MO
2015 Gulf Shores, AL
2016 Columbus, IN 2017 Deming, NM
2018 Cody, WY
2019 Newton, KS
2020 No Convention
2021 Penn Yan, NY
2022 Burlington, VT
2023 Sault Ste. Marie, MI (to be held)
CAUTION - My forum posts may be worth what you paid for them!

Bruce Fenstermacher, Past President, TIC170A
Email: brucefenster at gmail.com
User avatar
Wyoming1
Posts: 31
Joined: Sat Nov 13, 2021 7:23 am

Re: Convention

Post by Wyoming1 »

Thank you for the info
User avatar
cessna170bdriver
Posts: 4058
Joined: Mon Apr 22, 2002 5:13 pm

Re: Convention

Post by cessna170bdriver »

170 Convention site map from the Association’s convention page:

https://cessna170.org/wp-content/upload ... 0-2022.png
Miles

“I envy no man that knows more than myself, but pity them that know less.”
— Thomas Browne
User avatar
sfarringer
Posts: 307
Joined: Wed Jan 12, 2005 10:49 pm

Re: Convention

Post by sfarringer »

#3 on the map list says Dayton, Colorado.
But the dot on the map sure looks like it is more likely to have been Dayton, Ohio! :?:
Ragwing S/N 18073
User avatar
cessna170bdriver
Posts: 4058
Joined: Mon Apr 22, 2002 5:13 pm

Re: Convention

Post by cessna170bdriver »

sfarringer wrote:#3 on the map list says Dayton, Colorado.
But the dot on the map sure looks like it is more likely to have been Dayton, Ohio! :?:
It was Dayton, Ohio. I’ve been updating this map for YEARS and you’re the first who has been observant enough to notice the error. :oops:
Miles

“I envy no man that knows more than myself, but pity them that know less.”
— Thomas Browne
User avatar
GAHorn
Posts: 20914
Joined: Fri Apr 12, 2002 8:45 pm

Re: Convention

Post by GAHorn »

'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons. ;)
User avatar
cessna170bdriver
Posts: 4058
Joined: Mon Apr 22, 2002 5:13 pm

Re: Convention

Post by cessna170bdriver »

GAHorn wrote:DAYTON, COLORADO: https://en.wikipedia.org/wiki/Dayton,_Colorado
…which hasn’t been extant since Wilbur Wright was a toddler, so they wouldn’t have had an airport at which to hold a 170 Convention. :lol:
Miles

“I envy no man that knows more than myself, but pity them that know less.”
— Thomas Browne
User avatar
GAHorn
Posts: 20914
Joined: Fri Apr 12, 2002 8:45 pm

Re: Convention

Post by GAHorn »

cessna170bdriver wrote:
GAHorn wrote:DAYTON, COLORADO: https://en.wikipedia.org/wiki/Dayton,_Colorado
…which hasn’t been extant since Wilbur Wright was a toddler, so they wouldn’t have had an airport at which to hold a 170 Convention. :lol:
You posted it (Dayton, CO)… so Who are We to question you..? :lol:
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons. ;)
Mike Gourd
Posts: 13
Joined: Wed Sep 05, 2007 9:53 pm

Re: Convention

Post by Mike Gourd »

If this is the "INTERNATIONAL Cessna 170 Association", then perhaps a convention could be held outside of the USA.
User avatar
sfarringer
Posts: 307
Joined: Wed Jan 12, 2005 10:49 pm

Re: Convention

Post by sfarringer »

Mike Gourd wrote:If this is the "INTERNATIONAL Cessna 170 Association", then perhaps a convention could be held outside of the USA.
I am pretty sure that Canada is not part of the USA! :wink:
Ragwing S/N 18073
User avatar
Bruce Fenstermacher
Posts: 10297
Joined: Tue Apr 23, 2002 11:24 am

Re: Convention

Post by Bruce Fenstermacher »

Mike Gourd wrote:If this is the "INTERNATIONAL Cessna 170 Association", then perhaps a convention could be held outside of the USA.
We are an international association because we have members from around the world. No citizen of any country is excluded. Currently we have at least one member from each country identified by the following 2 letter postal identifier: AE, AR, AT, AU, BE, CA, CH, DE, DK, ES, FI, FR, GB, HK, IE, MX, NZ, PA, SE, UA, US and UY. That is 22 countries.

There is nothing stopping a member from proposing to host a convention in any country.
CAUTION - My forum posts may be worth what you paid for them!

Bruce Fenstermacher, Past President, TIC170A
Email: brucefenster at gmail.com
User avatar
c170b53
Posts: 2518
Joined: Mon Apr 22, 2002 8:01 pm

Re: Convention

Post by c170b53 »

Correct Steve but we probably could be bought. Mike..humm you do have a strip and humm..Don’t think there’s been a convention in NS and I hear there’s often lobster to be had there if in season.
Jim McIntosh..
1953 C170B S/N 25656
02 K1200RS
User avatar
GAHorn
Posts: 20914
Joined: Fri Apr 12, 2002 8:45 pm

Re: Convention

Post by GAHorn »

I Move we accept Mike’s offer to Host a Convention Next Year In NovaScotia… :!:

Second anyone..?
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons. ;)
User avatar
ghostflyer
Posts: 1387
Joined: Mon Apr 21, 2008 3:06 am

Re: Convention

Post by ghostflyer »

yes, i will second that .love lobster.
Post Reply