Page 1 of 1

180 hp STC owners

Posted: Sun Nov 10, 2019 6:09 am
by ghostflyer
Today having a BIG clean out of all my aviation theory books ,exams papers, assignments I found a sheet of paper dated back in 2001 with the STC no. SAO1111CH and having mentioned on it a James T Hancock of Minnesota . This STC was for the fitment of a 180hp lycoming with a Hartzell prop. So my question is does any body know about this STC or what happen to it ? .

Re: 180 hp STC owners

Posted: Sun Nov 10, 2019 6:52 am
by n2582d
The third character is a "zero" rather than an "Oh".
Click to Enlarge
Click to Enlarge
This STC is still available from Hartzell. Hancock is listed the FAA's airmen database. Was he the guy who signed off the installation of the Hartzell prop?

Re: 180 hp STC owners

Posted: Sun Nov 10, 2019 4:24 pm
by hilltop170
It looks to me if you buy the prop, the STC comes with it and is the STC to install the prop only. If so, the engine would have to be installed per some other STC.

I like the note at the bottom which says installation available for additional charge.

So maybe......I take my O300-D powered 170 to Hartzell and they install a Lycoming 0-360 and a prop? Dream on broomstick cowboy! :lol: :lol: :lol:

http://hartzellprop.com/wp-content/uplo ... essna1.pdf

Re: 180 hp STC owners

Posted: Sun Nov 10, 2019 11:32 pm
by ghostflyer
Thank you for that Richard, that was a good laugh ,I nearly spit my coffee.