Re: oil filter adapter AD
Posted: Mon Jan 04, 2021 12:27 am
We need a “LIKE” emoticon!Joe Moilanen wrote:This was my answer to the one inch socket.
Joe
4518C
Formed to preserve and promote a truly classic airplane
https://forum.cessna170.org/forums/
We need a “LIKE” emoticon!Joe Moilanen wrote:This was my answer to the one inch socket.
Joe
4518C
Thank you George! I guess necessity is the Mother of invention!GAHorn wrote:We need a “LIKE” emoticon!Joe Moilanen wrote:This was my answer to the one inch socket.
Joe
4518C
Paul, you have a 1" to 3/4" adapter you must work on Kubota Tractors.4583C wrote:My answer to the 1” square socket problem. 1” to 3/4” adapter with a 12 point 7/8” socket stuck on the square 3/4” male end. Glad to have the SB done, although mine had never leaked with the fiber gasket.
Strangely enough I have two of those adapters and no 1” drives...don’t know if I could pick up a 1” drive ratchet anymore!johneeb wrote:Paul, you have a 1" to 3/4" adapter you must work on Kubota Tractors.4583C wrote:My answer to the 1” square socket problem. 1” to 3/4” adapter with a 12 point 7/8” socket stuck on the square 3/4” male end. Glad to have the SB done, although mine had never leaked with the fiber gasket.