N2935D Makeover Debut

A place to relax and discuss flying topics.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Re: N2935D Makeover Debut

Postby brian.olson » Sun Jul 29, 2018 10:55 am

Congratulations on such a well-deserved award! It looked stunning sitting at Oshkosh!
Brian
1950 170A
N5762C s/n 19716
User avatar
brian.olson
 
Posts: 178
Joined: Mon Aug 14, 2017 12:04 pm
Location: Fayetteville, GA

Re: N2935D Makeover Debut

Postby 170C » Sun Jul 29, 2018 4:22 pm

Congratulations Rusty! A well deserved award. I knew once you allowed your 170 to be judged that it would be a winner. Hopefully you can bring it to the 2019 convention in Newton. KS.
OLE POKEY
170C
Director:
2012-2018
User avatar
170C
 
Posts: 3176
Joined: Tue May 06, 2003 11:59 am
Location: Murfreesboro, TN

Re: N2935D Makeover Debut

Postby n2582d » Wed Nov 28, 2018 5:29 pm

Rusty,
Having just read the Sport Aviation article on your plane I’m in awe of your dedication with the polisher. It’s mirror finish is absolutely breathtaking! Congratulations on a very well deserved award.
Gary
User avatar
n2582d
 
Posts: 2348
Joined: Mon Apr 29, 2002 4:58 am
Location: Mariposa, CA

Re: N2935D Makeover Debut

Postby rusty » Tue Dec 04, 2018 3:46 am

Thank you very much for the compliments about 35 D. Means a lot form a fellow member of the Association!!!
User avatar
rusty
 
Posts: 60
Joined: Tue Feb 23, 2010 8:13 pm

Re: N2935D Makeover Debut

Postby n2582d » Tue Dec 04, 2018 5:12 am

Rusty,
Quick question. Would you happen to have a paint code for the gray on your engine case? I know it’s a different shade of gray than Lycoming uses. I asked the tech rep at TCM and he didn’t have it. Randolph paint didn’t have it. Tim McKnight at Air Repair recommended Awlgrip G1577.

Thanks
Gary
User avatar
n2582d
 
Posts: 2348
Joined: Mon Apr 29, 2002 4:58 am
Location: Mariposa, CA

Re: N2935D Makeover Debut

Postby rusty » Tue Dec 04, 2018 4:39 pm

We are looking for the paint can now. Brent just told me it must be at home and not the shop.
User avatar
rusty
 
Posts: 60
Joined: Tue Feb 23, 2010 8:13 pm

Re: N2935D Makeover Debut

Postby Tom Brookover » Thu Nov 26, 2020 4:43 am

Rusty, Would you happen to have the paint code for the turquoise color? My 1955 striping was turquoise out of the factory, same scheme as yours, repainted a bright blue quite some time ago, and is now at the paint shop awaiting a new coat after most of the striping wore off and corrosion set in. I am trying to match the factory scheme and color and yours is by far the best looking replica I've seen.
User avatar
Tom Brookover
 
Posts: 8
Joined: Sun Apr 14, 2019 6:40 pm

Re: N2935D Makeover Debut

Postby rusty » Thu Dec 10, 2020 9:23 pm

Tom I can send you a picture of the codes on the can. Send me your E-Mail it needs to be tinted just a little darker.
User avatar
rusty
 
Posts: 60
Joined: Tue Feb 23, 2010 8:13 pm

Previous

Return to The Pilot Lounge

Who is online

Users browsing this forum: Bing [Bot] and 13 guests