Exhaust system for engine C-145-2H
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
Exhaust system for engine C-145-2H
good afternoon, have all of you today I would like to ask your help to get the exhaust system for my Cessna 170B 1954 with a C-145-2H engine I NEED THE COMPLETE SYSTEM OR THE PIPES THAT EXIT THE ESCAPES OF THE CYLINDER FROM THE SIDE LEFT THAT HAS A FORM OF TRIDENT OR A CATALOG OF PARTS OR PRICE PER PIECE, IN WAITING OF ITS COMMENTS, DISCUSS ME BY GRATEFULING YOU IN ADVANCE YOUR FINE ATTENTION FOR THIS APPLICATION.
- Bruce Fenstermacher
- Posts: 10318
- Joined: Tue Apr 23, 2002 11:24 am
Re: Exhaust system for engine C-145-2H
Of course the Cessna IPC has all the parts numbers.
AWI is one supplier of most of the parts. https://awi-ami.com/cessna-170a-b-exhau ... pped-image
What they don't have, and I'm not sure anyone does, is the shroud seals. Been a while since I've price it but I'd bet if you need everything it will set you back near, if not more, than $2500. Hopefully you won't need every part. Sounds like maybe you only need some parts.
There are other suppliers of these parts of course. I think you'll find their prices nearly the same as AWI on the parts they do have. I think AWI may have the largest number of the parts compared to others.
AWI is one supplier of most of the parts. https://awi-ami.com/cessna-170a-b-exhau ... pped-image
What they don't have, and I'm not sure anyone does, is the shroud seals. Been a while since I've price it but I'd bet if you need everything it will set you back near, if not more, than $2500. Hopefully you won't need every part. Sounds like maybe you only need some parts.
There are other suppliers of these parts of course. I think you'll find their prices nearly the same as AWI on the parts they do have. I think AWI may have the largest number of the parts compared to others.
CAUTION - My forum posts may be worth what you paid for them!
Bruce Fenstermacher, Past President, TIC170A
Email: brucefenster at gmail.com
Bruce Fenstermacher, Past President, TIC170A
Email: brucefenster at gmail.com