1948 Cessna 170 flap stop bolt flange

How to keep the Cessna 170 flying and airworthy.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
Seandavis333
Posts: 2
Joined: Sat Jun 22, 2019 8:57 pm

1948 Cessna 170 flap stop bolt flange

Post by Seandavis333 »

Sorry guys, I need some help… I have gone through the parts book and I cannot find the flange that rivets to the trailing edge of the wing that the flap stop bolt mounts to… Does anybody have a part number or possibly know where I can obtain one?
User avatar
c170b53
Posts: 2527
Joined: Mon Apr 22, 2002 8:01 pm

Re: 1948 Cessna 170 flap stop bolt flange

Post by c170b53 »

05414C38-F1CC-4B00-9F15-5FCB873F7C38.jpeg
This ? ( 170A training edge in pic)
Edit my mistake a 48 fabric wing, as usual knot thinking.
Jim McIntosh..
1953 C170B S/N 25656
02 K1200RS
User avatar
c170b53
Posts: 2527
Joined: Mon Apr 22, 2002 8:01 pm

Re: 1948 Cessna 170 flap stop bolt flange

Post by c170b53 »

I believe it’s the same thing item number 4-55 part number AN366F-1032 on both models, if indeed this is what you’re looking for :D
Jim McIntosh..
1953 C170B S/N 25656
02 K1200RS
User avatar
sfarringer
Posts: 309
Joined: Wed Jan 12, 2005 10:49 pm

Re: 1948 Cessna 170 flap stop bolt flange

Post by sfarringer »

Here is a picture of the AN366 nut plate for the flap stop on my '48 (I didn't really remove the fabric just for this photo.....)
IMG_20200124_151331095.jpg
Ragwing S/N 18073
User avatar
Bruce Fenstermacher
Posts: 10313
Joined: Tue Apr 23, 2002 11:24 am

Re: 1948 Cessna 170 flap stop bolt flange

Post by Bruce Fenstermacher »

The stop bolt goes into a nut plate on the rear auxiliary spar. For the left side this can be seen in page 8, figure 4 number 56 of the IPC. The listing for this part doesn't show up til page 11. Of course the right wing would be identical but listed in a different figure on another page.
CAUTION - My forum posts may be worth what you paid for them!

Bruce Fenstermacher, Past President, TIC170A
Email: brucefenster at gmail.com
Post Reply