Forward Ashtray(s) needed

Where TIC170A members may list items for sale or trade or make wants known.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Forum rules
Guests and forum participants are welcome to view posts in this area but one must be TIC170A member to post an ad here - -Why Join the TIC170A - - How to Join the TIC170A

Forward Ashtray(s) needed

Postby MadAero » Fri Jan 08, 2021 12:17 am

Looking for at least one, but would take two forward ashtrays (170A) if they were better than the one we have.
Thanks!
User avatar
MadAero
 
Posts: 9
Joined: Wed Jan 06, 2016 9:51 pm

Re: Forward Ashtray(s) needed

Postby daedaluscan » Fri Jan 08, 2021 2:19 am

I think I have them, I’ll look tomorrow
Charlie

1956 170B C-GDRG #27019
User avatar
daedaluscan
 
Posts: 400
Joined: Fri Apr 20, 2012 7:03 pm
Location: Texada BC

Re: Forward Ashtray(s) needed

Postby daedaluscan » Sun Jan 10, 2021 6:05 am

IMG_7782.jpg
IMG_7782.jpg
Attachments
IMG_7781.jpg
Charlie

1956 170B C-GDRG #27019
User avatar
daedaluscan
 
Posts: 400
Joined: Fri Apr 20, 2012 7:03 pm
Location: Texada BC

Re: Forward Ashtray(s) needed

Postby MadAero » Sun Jan 10, 2021 6:14 pm

Thank you for looking and posting, but sadly, those are for a newer airplane. The forward ashtrays on the ‘48 and 170A drop into the sheet metal cover on top of the sidewall panel.
I’ll post a IPC reference and pic.
User avatar
MadAero
 
Posts: 9
Joined: Wed Jan 06, 2016 9:51 pm

Re: Forward Ashtray(s) needed

Postby daedaluscan » Sun Jan 10, 2021 8:02 pm

No problem, my mistake. If anyone else wants them they are welcome to them if they pay postage. I am not planning on taking up smoking anytime soon.
Charlie

1956 170B C-GDRG #27019
User avatar
daedaluscan
 
Posts: 400
Joined: Fri Apr 20, 2012 7:03 pm
Location: Texada BC

Re: Forward Ashtray(s) needed

Postby hilltop170 » Sun Jan 10, 2021 9:15 pm

I have one in Texas that is fairly rusty but restorable. It might be a rear, I can’t remember.

I’ll be back there Feb 4 if you haven’t found one by then.
Richard Pulley
2014-2016 TIC170A Past President
1951 170A, N1715D, s/n 20158, O-300D
Owned from 1973 to 1984.
Bought again in 2006 after 22 years.
It's not for sale!
User avatar
hilltop170
 
Posts: 3325
Joined: Sat May 06, 2006 6:05 pm
Location: Retired in Alaska and the Texas hill country

Re: Forward Ashtray(s) needed

Postby GAHorn » Mon Jan 11, 2021 1:44 pm

Some early ashtrays installed in the window-sill/ledge. (PN 0413120)...while others were installed in the side-wall(PN 0411030-4) . It might be helpful to specify the type desired.
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight.
An originality nut (mostly) for the right reasons. ;)
User avatar
GAHorn
 
Posts: 19321
Joined: Fri Apr 12, 2002 8:45 pm
Location: Spicewood (Austin), Texas

Re: Forward Ashtray(s) needed

Postby MadAero » Wed Jan 13, 2021 9:01 pm

The ashtray I am looking for is the 0413120, it is rectangular with the lid on top that inserts into the upper kick panel cover.
Thanks for looking!
32810CBE-A1E9-4195-A042-BDC0956BBC95.jpeg

46841AC1-604B-4796-A3DB-3536EF0EB2EA.jpeg
User avatar
MadAero
 
Posts: 9
Joined: Wed Jan 06, 2016 9:51 pm

Re: Forward Ashtray(s) needed

Postby mschlender » Wed Jan 27, 2021 12:04 am

Did you ever find any?
User avatar
mschlender
 
Posts: 102
Joined: Mon Jun 03, 2002 1:27 am

Re: Forward Ashtray(s) needed

Postby MadAero » Wed Jan 27, 2021 12:58 pm

No....not yet! Still on the hunt
User avatar
MadAero
 
Posts: 9
Joined: Wed Jan 06, 2016 9:51 pm

Re: Forward Ashtray(s) needed

Postby dstates » Wed Jan 27, 2021 1:39 pm

Can I ask why you need them? Are you just wanting something to fill the openings, or do you need them to be ash trays? If you don't specifically need them to be ash trays you could remake the interior piece out of aluminum sheet or you can do what I did and take the ash trays out and 3D print a "pen cup" that goes in the holes. I use the cups to hold my ANR headset controller.

Doug

ashtray.jpg
N1235D - 1951 170A - SN: 20118
User avatar
dstates
 
Posts: 252
Joined: Sun Jun 30, 2019 5:50 pm
Location: Geneseo, IL

Re: Forward Ashtray(s) needed

Postby hilltop170 » Sat Feb 06, 2021 4:50 am

hilltop170 wrote:I have one in Texas that is fairly rusty but restorable. It might be a rear, I can’t remember.

I’ll be back there Feb 4 if you haven’t found one by then.



Sorry, but what I have are two rear ashtrays, I do not have a front one.
Richard Pulley
2014-2016 TIC170A Past President
1951 170A, N1715D, s/n 20158, O-300D
Owned from 1973 to 1984.
Bought again in 2006 after 22 years.
It's not for sale!
User avatar
hilltop170
 
Posts: 3325
Joined: Sat May 06, 2006 6:05 pm
Location: Retired in Alaska and the Texas hill country

Re: Forward Ashtray(s) needed

Postby johneeb » Sat Feb 06, 2021 2:14 pm

dstates wrote:Can I ask why you need them? Are you just wanting something to fill the openings, or do you need them to be ash trays? If you don't specifically need them to be ash trays you could remake the interior piece out of aluminum sheet or you can do what I did and take the ash trays out and 3D print a "pen cup" that goes in the holes. I use the cups to hold my ANR headset controller.

Doug

ashtray.jpg


Doug, maybe you can sell this idea to "WeatherTech" :-)
John E. Barrett
aka. Johneb

Sent from my "Cray Super Computer"
User avatar
johneeb
 
Posts: 1420
Joined: Thu Jun 26, 2003 2:44 am
Location: St. Charles, Ill. USA, 3rd Rock Out

Re: Forward Ashtray(s) needed

Postby GAHorn » Sat Feb 06, 2021 2:20 pm

dstates wrote:Can I ask why you need them? Are you just wanting something to fill the openings, or do you need them to be ash trays? If you don't specifically need them to be ash trays you could remake the interior piece out of aluminum sheet or you can do what I did and take the ash trays out and 3D print a "pen cup" that goes in the holes. I use the cups to hold my ANR headset controller.

Doug

ashtray.jpg


Makes me wish I had those type ashtrays... GREAT IDEA, DOUG!
(You might print some up and offer them in TradeMart as a fund-raiser?)
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight.
An originality nut (mostly) for the right reasons. ;)
User avatar
GAHorn
 
Posts: 19321
Joined: Fri Apr 12, 2002 8:45 pm
Location: Spicewood (Austin), Texas

Re: Forward Ashtray(s) needed

Postby Coolin170 » Sat Feb 13, 2021 12:52 am

We remade the interior piece out of aluminium sheet so I believe we have two ashtrays in storage. If you haven’t found some before then, I’ll let you know when I can check storage in a week or so, more or less.
Attachments
Side Panel..jpg
Side Panel..jpg (60.33 KiB) Viewed 173 times
User avatar
Coolin170
 
Posts: 8
Joined: Fri Sep 23, 2016 4:36 pm
Location: Colorado Spgs & Coolin, ID


Return to The TradeMart

Who is online

Users browsing this forum: No registered users and 0 guests