oil filter adapter SB

A place to relax and discuss flying topics.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

User avatar
GAHorn
Posts: 20967
Joined: Fri Apr 12, 2002 8:45 pm

Re: oil filter adapter AD

Post by GAHorn »

Joe Moilanen wrote:This was my answer to the one inch socket.

Joe
4518C
We need a “LIKE” emoticon!
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons. ;)
User avatar
Joe Moilanen
Posts: 596
Joined: Sun Dec 28, 2003 5:45 am

Re: oil filter adapter AD

Post by Joe Moilanen »

GAHorn wrote:
Joe Moilanen wrote:This was my answer to the one inch socket.

Joe
4518C
We need a “LIKE” emoticon!
Thank you George! I guess necessity is the Mother of invention!
User avatar
mmcmillan2
Posts: 161
Joined: Sat Jul 04, 2020 9:30 pm

Re: oil filter adapter AD

Post by mmcmillan2 »

Mine is a few years old, had the hex head bolt. Fiber gasket was fine, but i was able to rotate the assembly by hand. My mechanic reinstalled with two copper washers per the current instructions. Looks good after my test flight.
170B owner, KCFD, CFI(I), ATP Multi
User avatar
4583C
Posts: 457
Joined: Tue Apr 23, 2002 8:20 pm

Re: oil filter adapter SB

Post by 4583C »

My answer to the 1” square socket problem. 1” to 3/4” adapter with a 12 point 7/8” socket stuck on the square 3/4” male end. Glad to have the SB done, although mine had never leaked with the fiber gasket.
Attachments
F3D6169D-9863-45F7-A9EE-6AAFB7B3C136.jpeg
F3D6169D-9863-45F7-A9EE-6AAFB7B3C136.jpeg (18.76 KiB) Viewed 2751 times
User avatar
johneeb
Posts: 1520
Joined: Thu Jun 26, 2003 2:44 am

Re: oil filter adapter SB

Post by johneeb »

4583C wrote:My answer to the 1” square socket problem. 1” to 3/4” adapter with a 12 point 7/8” socket stuck on the square 3/4” male end. Glad to have the SB done, although mine had never leaked with the fiber gasket.
Paul, you have a 1" to 3/4" adapter you must work on Kubota Tractors.
John E. Barrett
aka. Johneb

Sent from my "Cray Super Computer"
User avatar
4583C
Posts: 457
Joined: Tue Apr 23, 2002 8:20 pm

Re: oil filter adapter SB

Post by 4583C »

johneeb wrote:
4583C wrote:My answer to the 1” square socket problem. 1” to 3/4” adapter with a 12 point 7/8” socket stuck on the square 3/4” male end. Glad to have the SB done, although mine had never leaked with the fiber gasket.
Paul, you have a 1" to 3/4" adapter you must work on Kubota Tractors.
Strangely enough I have two of those adapters and no 1” drives...don’t know if I could pick up a 1” drive ratchet anymore! :roll:
User avatar
GAHorn
Posts: 20967
Joined: Fri Apr 12, 2002 8:45 pm

Re: oil filter adapter SB

Post by GAHorn »

Here’s another option.. 1-inch, 8-point, 1/2” drive: https://www.amazon.com/gp/product/B007Y ... UTF8&psc=1
Attachments
89D4B7F3-59B0-40F0-9BA6-F8A766EFB5A2.jpeg
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons. ;)
Post Reply