Looking for hardware

How to keep the Cessna 170 flying and airworthy.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
User avatar
dstates
Posts: 505
Joined: Sun Jun 30, 2019 5:50 pm

Looking for hardware

Post by dstates »

I'm looking for some hardware for the center window support strap. The IPC shows the following part numbers: washer is 0311001-27 and cap nut is 22NKM-10-3. Does anyone have a source for these or have these been superseded?

Thanks,
Doug
1.jpg
2.jpg
You do not have the required permissions to view the files attached to this post.
N1235D - 1951 170A - SN: 20118
Top
User avatar
n2582d
Posts: 3011
Joined: Mon Apr 29, 2002 4:58 am

Re: Looking for hardware

Post by n2582d »

Doug,
Those washers, made from cork, are used in several locations on the 170. I wrote about them here and again here. Superseding Cessna p/n is S350.

The bubble top nuts are described by Genuine Aircraft Hardware here. If you're an originality nut, the nut to get is one without the Cad II plating. Delete the "F" in the part number to get silver Cad I plating. They can be ordered from this page of Genuine Aircraft Hardware's website.
Gary
Top
User avatar
dstates
Posts: 505
Joined: Sun Jun 30, 2019 5:50 pm

Re: Looking for hardware

Post by dstates »

n2582d wrote:Doug,
Those washers, made from cork, are used in several locations on the 170. I wrote about them here and again here. Superseding Cessna p/n is S350.

The bubble top nuts are described by Genuine Aircraft Hardware here. If you're an originality nut, the nut to get is one without the Cad II plating. Delete the "F" in the part number to get silver Cad I plating. They can be ordered from this page of Genuine Aircraft Hardware's website.
Thanks!
N1235D - 1951 170A - SN: 20118
Top
User avatar
dstates
Posts: 505
Joined: Sun Jun 30, 2019 5:50 pm

Re: Looking for hardware

Post by dstates »

I've ordered the nuts and washers. Preferred Air Parts had the best prices for S350 and 22NKM02.

Thanks again for the help!
Doug
N1235D - 1951 170A - SN: 20118
Top
User avatar
GAHorn
Posts: 21290
Joined: Fri Apr 12, 2002 8:45 pm

Re: Looking for hardware

Post by GAHorn »

dstates wrote:I've ordered the nuts and washers. Preferred Air Parts had the best prices for S350 and 22NKM02.

Thanks again for the help!
Doug
I hope that price INcluded the windshield…. :lol:
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons. ;)
Top
Post Reply

Return to “The Hangar”

Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.