Airbox repairs-What alloy?

How to keep the Cessna 170 flying and airworthy.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
User avatar
Vertical
Posts: 151
Joined: Mon Oct 08, 2018 12:41 am

Airbox repairs-What alloy?

Post by Vertical »

Anyone know what the 170b airbox is made from? 4130? Mild steel? Galvanized? Mix dependent on component?

Appreciate it if someone has experience on this. Need to do a small weld repair.

Thanks!
User avatar
schnepel
Posts: 16
Joined: Thu Jun 12, 2014 8:47 pm

Re: Airbox repairs-What alloy?

Post by schnepel »

Mild steel, I don’t see a need for 4130 on the box. Galvanized metal would produce dangerous gas in the event of a fire. I’ve brazed on box components (lower heat that helps minimize warping the metal) in the past with good results.
User avatar
Vertical
Posts: 151
Joined: Mon Oct 08, 2018 12:41 am

Re: Airbox repairs-What alloy?

Post by Vertical »

Thanks for the feedback. Also the first post in almost 10 years? Welcome.
User avatar
schnepel
Posts: 16
Joined: Thu Jun 12, 2014 8:47 pm

Re: Airbox repairs-What alloy?

Post by schnepel »

Vertical wrote:Thanks for the feedback. Also the first post in almost 10 years? Welcome.
:D
Post Reply