Rosen Visors

How to keep the Cessna 170 flying and airworthy.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
CraigH
Posts: 259
Joined: Wed Aug 31, 2005 11:55 pm

Post by CraigH »

Mine attached right into the holes where the original visors came out. A simple 20 minute installation.
Craig Helm
Graham, TX (KRPH)
2000 RV-4
ex-owner 1956 Cessna 170B N3477D, now CF-DLR
Top
User avatar
KMac
Posts: 92
Joined: Tue May 17, 2005 1:08 am

Post by KMac »

Craig,
You're just rubbing it in aren't you? :D My 170 is a 1949 model and doesn't have some of the cool mounting stuff already installed from the factory like for the visors and shoulder harnesses. Are the factory mounts in the spar carry through or the shield?
Thanks for the info.
Kevin
Top
Post Reply

Return to “The Hangar”

Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.