How do you tell if you have cleveland wheels?
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
-
- Posts: 123
- Joined: Sat Nov 19, 2005 11:04 pm
How do you tell if you have cleveland wheels?
Aside from a logbook entry. How would I tell whether I have cleveland wheels or the stock wheels? All I have is the wheels no backing plates or calipers and I'm trying to figure out what they are. Thanks....
-
- Posts: 2560
- Joined: Mon Apr 22, 2002 8:01 pm
Re: How do you tell if you have cleveland wheels?
Sounds like your missing a few data tags.
Jim McIntosh..
1953 C170B S/N 25656
02 K1200RS
1953 C170B S/N 25656
02 K1200RS
- pdb
- Posts: 471
- Joined: Tue Apr 23, 2002 3:39 am
Re: How do you tell if you have cleveland wheels?
Get down on your hands and knees with a flashlight, some paper towels, and some Extreme Simple Green (aircraft safe) and gently clean off your cylinder housing. The Cleveland brakes have a small (~1/2 x 1") soft metal label that should identify the model brake you have if its a Cleveland wheel.
Pete Brown
Anchorage, Alaska
N4563C 1953 170B
http://farm3.staticflickr.com/2366/2527 ... 4e43_b.jpg
Anchorage, Alaska
N4563C 1953 170B
http://farm3.staticflickr.com/2366/2527 ... 4e43_b.jpg
-
- Posts: 123
- Joined: Sat Nov 19, 2005 11:04 pm
Re: How do you tell if you have cleveland wheels?
The calipers were put in some sort of acid bath and are shot........So no tag. I see some numbers on the hubs....But???
- mit
- Posts: 1067
- Joined: Wed May 01, 2002 1:54 am
Re: How do you tell if you have Cleveland wheels?
If your disc is on the outside of the wheel they are probably Cleveland's. If the Disc is on the inside of the wheel they are good years. If the Disc is bolted on to the thru bolts it is probably a Cleveland. I have seen McCauley wheels & disc's installed with Cleveland calipers.
Tim
-
- Posts: 123
- Joined: Sat Nov 19, 2005 11:04 pm
Re: How do you tell if you have cleveland wheels?
What do you mean inside? Or outside?
- johneeb
- Posts: 1543
- Joined: Thu Jun 26, 2003 2:44 am
Re: How do you tell if you have cleveland wheels?
Hope this helps!!!!!!
Cleveland Wheel McCauley Wheel Visit 170 parts manual page 52 figure 27 to see Cessna Wheel
Cleveland Wheel McCauley Wheel Visit 170 parts manual page 52 figure 27 to see Cessna Wheel
You do not have the required permissions to view the files attached to this post.
John E. Barrett
aka. Johneb
Sent from my "Cray Super Computer"
aka. Johneb
Sent from my "Cray Super Computer"
-
- Posts: 123
- Joined: Sat Nov 19, 2005 11:04 pm
Re: How do you tell if you have cleveland wheels?
Is cessna the same as mccauley?
- mit
- Posts: 1067
- Joined: Wed May 01, 2002 1:54 am
Re: How do you tell if you have cleveland wheels?
They came with Good Years, STC'd for Cleveland. The disc on a Good Year fits in side the inner wheel half and is held in place by clips. If your disc is bloted on it is probably a clevlend.
http://www.parker.com/portal/site/PARKE ... 20PRODUCTS
http://www.parker.com/portal/site/PARKE ... 20PRODUCTS
Tim
-
- Posts: 123
- Joined: Sat Nov 19, 2005 11:04 pm
Re: How do you tell if you have cleveland wheels?
Ok then I have clevelands....Anybody know if this was the same on a 1956 C-172? I imagine so?
-
- Posts: 123
- Joined: Sat Nov 19, 2005 11:04 pm
Re: How do you tell if you have cleveland wheels?
Also curious if anyone has a picture of goodyears? This clip thing has me curious I've never seen such a thing.
- mit
- Posts: 1067
- Joined: Wed May 01, 2002 1:54 am
Re: How do you tell if you have cleveland wheels?
look in the parts bookcfiatzph wrote:Also curious if anyone has a picture of goodyears? This clip thing has me curious I've never seen such a thing.
Tim
- GAHorn
- Posts: 21302
- Joined: Fri Apr 12, 2002 8:45 pm
Re: How do you tell if you have cleveland wheels?
Cessna acquired McCauley, who made wheels and brakes that can be confused with Clevelands. If there is no datatag or other identifyingcfiatzph wrote:Ok then I have clevelands....Anybody know if this was the same on a 1956 C-172? I imagine so?
numbers (serial numbers that match the installation paperwork?) on the wheel, then the wheel should be rejected or returned to the mfr'r for overhaul.
(That's the officially correct action, not necessarily what a frugal pilot might do. keep in mind that if you have a Cleveland conversion your logs should reflect that. If you have a Cleveland conversion that is un-identifiable...even if it's obviously Clevelands but no datatags exist.... it's just like your seatbelts without datatags: They should be removed and overhauled and/or replaced. Why? Because there are LOTS of Cleveland wheels/brakes that are not approved for this airplane, and still others that are approved only on particular serial numbered airplanes. If YOUR STC specifies you should have Cleveland 43-60 wheels... but you have some kinda wheel that LOOKS like a Cleveland but is unidentified... then you have a problem of undocumented wheels.)
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.

-
- Posts: 123
- Joined: Sat Nov 19, 2005 11:04 pm
Re: How do you tell if you have cleveland wheels?
Well....they are currently off the aircraft. I was trying to identify them to see if it was worth keeping them around, throwing them away, selling them etc. The two said aircraft had new cleveland kits installed as you recommended just now a couple years ago.
Thanks
Thanks
Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.