Adding a shoulder harness to a B model
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
Adding a shoulder harness to a B model
I've read here that my 1953 170B should have a #10 rivnut installed in it's rear spar, for installation of a shoulder harness, but I've looked, in the vicinity of the rear door post, and cannot find it. Can someone direct me very specifically to it's location and/or send a photo? Thanks!
Re: Adding a shoulder harness to a B model
Eddie,
Look at the Bas WEB site listed below. There are several pictures that will help you locate the Riv-nut in the Carry Through Spar.
http://www.basinc-aeromod.com/cessna.htm
Look at the Bas WEB site listed below. There are several pictures that will help you locate the Riv-nut in the Carry Through Spar.
http://www.basinc-aeromod.com/cessna.htm
John E. Barrett
aka. Johneb
Sent from my "Cray Super Computer"
aka. Johneb
Sent from my "Cray Super Computer"
-
- Posts: 76
- Joined: Sun Feb 12, 2006 5:10 am
Re: Adding a shoulder harness to a B model
Great! Thanks John.
Re: Adding a shoulder harness to a B model
It is always possible that the rear carry throgh spar may have been replaced for corrosion and the replacement part may not have the platenut installed.
BL