float fittings

Andrew D. · Post by **Andrew D.** » Mon Sep 15, 2003 3:35 pm

does anyone have float kit drawings for 170B that I can borrow , copy , or buy ?

mit · Post by **mit** » Tue Sep 16, 2003 5:26 am

You use to be able to buy them from Edo. Now that Edo is owned by Kenmore give them a call

c170b53 · Post by **c170b53** » Tue Sep 16, 2003 2:16 pm

I'm interested as well in acquiring the float kit installation drawings. I'm looking for the drawings for the modifications to the fuselage that add bulkheads ,doublers and the outside fuselage skin doublers. I've got some of the parts and I'm hunting for others. I have heard that Cessna will sell the drawings for a reasonable amount but have not pursued that lead yet

mit · Post by **mit** » Tue Sep 16, 2003 6:23 pm

c170b53 wrote:I'm interested as well in acquiring the float kit installation drawings. I'm looking for the drawings for the modifications to the fuselage that add bulkheads ,doublers and the outside fuselage skin doublers. I've got some of the parts and I'm hunting for others. I have heard that Cessna will sell the drawings for a reasonable amount but have not pursued that lead yet

The Bulkhead and skin are Cessna parts, not on any drawing that I know of. They are in the parts book. I bought all the parts right from Cessna about 15 years ago the false bulkhead's where about 500 apiece back then.

The International Cessna^® 170 Association

float fittings

float fittings

float Kit

Re: float Kit