Looking for a project
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
-
- Posts: 4
- Joined: Mon Mar 25, 2013 2:19 am
Looking for a project
Hi everyone. I am new here. I am an A&P mechanic looking to restore an airplane to eventually be my pride and joy. I cannot think of a better aircraft than a Cessna 170. I am looking for a project 170. I would prefer an A or B model but will take any. I would like a complete airframe, or airframe and engine core. I thought maybe some of you other 170 enthusiasts had or know where there may be a 170 begging for a little love.
- pdb
- Posts: 471
- Joined: Tue Apr 23, 2002 3:39 am
Re: Looking for a project
How about telling us in part of the country are you looking.
Pete Brown
Anchorage, Alaska
N4563C 1953 170B
http://farm3.staticflickr.com/2366/2527 ... 4e43_b.jpg
Anchorage, Alaska
N4563C 1953 170B
http://farm3.staticflickr.com/2366/2527 ... 4e43_b.jpg
-
- Posts: 4
- Joined: Mon Mar 25, 2013 2:19 am
Re: Looking for a project
I am in south central Pennsylvania
- Ryan Smith
- Posts: 1213
- Joined: Tue Nov 25, 2008 4:26 am
Re: Looking for a project
http://www.cessna170.org/forums/viewtop ... =5&t=10024
From what I can recall, there have been a few failed attempts to buy the airplane, but it may be worth a start. This may be more project than you are looking for/too far gone. It would be great to see it saved.
From what I can recall, there have been a few failed attempts to buy the airplane, but it may be worth a start. This may be more project than you are looking for/too far gone. It would be great to see it saved.
-
- Posts: 4
- Joined: Mon Mar 25, 2013 2:19 am
Re: Looking for a project
That is a real shame to see such a great airplane suffering so bad. I saw some comments about the corrosion. I would imagine it would be pretty bad sitting outside for so long. Older Cessnas were bad for corrosion anyway then to let the poor thing out under the trees for so many years. If someone has looked at the airplane recently and feels it may be salvageable I might be interested it taking a trip down to look at it. Keep them coming. I would love to save one of these beauty's!
-
- Posts: 548
- Joined: Sat Jan 26, 2013 5:58 am
- lowNslow
- Posts: 1535
- Joined: Mon Apr 22, 2002 4:20 pm
Re: Looking for a project
I don't have a picture but if you go to N37.09 W120.49 in Google earth you can see this project. It is sitting next to Hwy 59 west of Merced, CA near where is intersects with Hwy152. This has been sitting in a farmers yard for quite a while and has been completely stripped with no N-number.
Karl
'53 170B N3158B SN:25400
ASW-20BL
'53 170B N3158B SN:25400
ASW-20BL
- Ryan Smith
- Posts: 1213
- Joined: Tue Nov 25, 2008 4:26 am
Re: Looking for a project
I had asked about the one in Merced a while back. It's also a sad sight. Several members have seen that airplane up close as well.
http://www.cessna170.org/forums/viewtop ... f=5&t=9374
http://www.cessna170.org/forums/viewtop ... f=5&t=9374
- n2582d
- Posts: 3014
- Joined: Mon Apr 29, 2002 4:58 am
Re: Looking for a project
You'd be money ahead buying Mike Roe's project in Virginia instead of crating a project from the left coast. There's also a 1951 170A model in the TradeMart.
Gary
-
- Posts: 4
- Joined: Mon Mar 25, 2013 2:19 am
Re: Looking for a project
Thank you all for responding. I have had a few PMs about projects and know I will find one. Keep the great leads coming.
Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.