Posted: Thu Mar 17, 2005 8:00 pm
Nuts. Just did a little test with some 3M 1300L forma mechanic at the field. It doesn't stick to the silicone based seal I have. It says as much on the can that is why I tested it.
Any one have any other thoughts what might stick to the silicone based seal I have. I could probably use silicone (738 or GEII) but I was hoping for something like a contact cement which would instantly cure so I wouldn't have to hold it in position over night.
Any one have any other thoughts what might stick to the silicone based seal I have. I could probably use silicone (738 or GEII) but I was hoping for something like a contact cement which would instantly cure so I wouldn't have to hold it in position over night.