Yep, all you need is 15" mask material and your on your way, the small cutters can be had for under 800 dollars. I remember when my friend bought her plotter cutter 15 years ago, its a 15 inch gerber that cost her 10 thousand for the plotter and software
check this out
http://www.craftrobostore.com/craftrobopro.html
Fuselage logo and tail design decal
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
-
mrpibb
- Posts: 395
- Joined: Wed Apr 23, 2003 10:48 pm
Re: Fuselage logo and tail design decal
Vic
N2609V
48 Ragwing
A Lanber 2097 12 gauge O/U Sporting
A happy go lucky Ruger Red label 20 ga
12N Aeroflex
Andover NJ
http://www.sandhillaviation.com
" Air is free untill you have to move it" BB.
N2609V
48 Ragwing
A Lanber 2097 12 gauge O/U Sporting
A happy go lucky Ruger Red label 20 ga
12N Aeroflex
Andover NJ
http://www.sandhillaviation.com
" Air is free untill you have to move it" BB.
Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.