Headliner Wire supports

How to keep the Cessna 170 flying and airworthy.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
bagarre
Posts: 2615
Joined: Thu Sep 30, 2010 11:35 pm

Re: Headliner Wire supports

Post by bagarre »

mit wrote:Just make one.
+1 that would be very easy to make in a vice with nearly any kind of aluminum laying around the shop.
Top
User avatar
mongo2
Posts: 99
Joined: Thu Nov 02, 2006 11:42 pm

Re: Headliner Wire supports

Post by mongo2 »

Thanks Guys! That's the part. I had to fabricate some of the other bow holder clips, so I can make a few of these too..Really appreciate the help..Now I can finish the install.Using a Spruce Gray wool , with the vertical zipper. So far it fits very nice....

Rick
Rick Champagne
C-170A N5475C
Top
Post Reply

Return to “The Hangar”

Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.