Page 12 of 48

Re: 27% 170B build

Posted: Fri Dec 05, 2014 2:08 am
by 170C
Looking GOOD! What are you using to steam the wood?

Re: 27% 170B build

Posted: Fri Dec 05, 2014 4:34 am
by Ryan Smith
Top of the doors look a little pointy. :wink:

Re: 27% 170B build

Posted: Fri Dec 05, 2014 11:55 am
by SteveF
This is totally out of control but I am enjoying every second of it. :D
Beautiful work. !!!!

Re: 27% 170B build

Posted: Fri Dec 05, 2014 3:31 pm
by Ryan Smith
Aryana wrote:Ok Ryan, you've got me fired up! I'm gonna fix these pointy doors :lol:

I was doing just fine until you "pointed" that out!
My work is done. :lol:

Re: 27% 170B build

Posted: Sat Dec 06, 2014 7:02 pm
by GAHorn
You gonna put a "lightweight" starter on it??? :lol:

Re: 27% 170B build

Posted: Sun Dec 07, 2014 1:57 am
by johneeb
Arish,
In the low camera angle photo it looks so like the real thing.

Re: 27% 170B build

Posted: Sun Dec 07, 2014 3:03 am
by Ryan Smith
Aryana wrote:They have one available! I passed on it since I thought it ruins the scale look of the engine.
Since 44C has neither a C85 nor a Lycoming conversion...it's only going to be so close. 8O

Do it. Do it.

Re: 27% 170B build

Posted: Sun Dec 07, 2014 3:38 pm
by C170U2
Amazing! I really can't believe what you are able to do! So much fun watching the progress!

Re: 27% 170B build

Posted: Sun Dec 07, 2014 5:05 pm
by hilltop170
Arash-
You're not really going to fly it are you? I can't fathom the patience it takes to add the details you are putting into that plane. It's a museum piece at this point! Sure would be a shame to ding it. But then again, I have seen your flying videos and know how competent you are as a pilot so maybe nothing to be concerned about?

Re: 27% 170B build

Posted: Tue Dec 09, 2014 12:18 am
by GAHorn
Those parts are so close...they need a PMA..... (Parts Made by Aryana) :lol:

Re: 27% 170B build

Posted: Tue Dec 09, 2014 9:47 pm
by Ryan Smith
Damn! Looking better and better every day!

You're still driving me nuts with the square door upper corners. 8O

Re: 27% 170B build

Posted: Wed Dec 10, 2014 12:48 am
by GAHorn
OK...I've finally realized...this thing will NEVER BE FINISHED.... Aryana is too damn picky to ever get this thing airborne! (remind anyone of their own "restoration" projects?) .... :lol:

Re: 27% 170B build

Posted: Wed Dec 10, 2014 3:56 pm
by lowNslow
The Hiller Museum is very impressive considering how small it is. I had the privilege of attending a party at Stanley Hiller's home before the museum was open. He was really down to the earth guy and had a amazing collection of scale models in his home many of which he built. He started Hiller Helicopters at the age of 17.

By the way, when will you start taking reservations for the bleacher seats for the test flight of the 27% build? I'm just a short hope away.

Re: 27% 170B build

Posted: Wed Dec 10, 2014 6:47 pm
by 170C
Aryana, educate this non model builder why you couldn't use the rounded tip prop when you fly this model you are building?

Is it a 6 or 8 bolt prop? :wink:

Re: 27% 170B build

Posted: Thu Dec 11, 2014 1:51 am
by C170U2
You inspired me....I just ordered the boys (and me :D ) a Piper Cub RC plane. It's almost ready to fly so not quite the same experience but hopefully it will inspire us to go big one of these days! I also ordered my dad a small ARF Champ for Christmas. When I was a kid, my dad and I flew RC, which allowed for some of the fonder memories of my childhood!