Page 1 of 1
ARC IN-1049AC
Posted: Thu Oct 17, 2013 11:46 am
by numberkruncher
Does anyone know how to mount a ARC IN-1049AC in the panel without cutting that huge "stop sign" in the panel? If I enlarge an instrument hole in my panel to that size I'm afraid I won't have any border left and will loose the strength of the panel. Thanks!
Re: ARC IN-1049AC
Posted: Thu Oct 17, 2013 4:43 pm
by GAHorn
Don't cut the panel at all. Drill four holes to accept the mounting frame and install long screws.
$T2eC16VHJH8E9qSEWJLIBRmWkoU4zQ~~60_14.jpg
Re: ARC IN-1049AC
Posted: Thu Oct 17, 2013 5:52 pm
by blueldr
I sure wish that I had an ARC IN-1049AC in my airplane. What in hell is it? (But everybody should have one!)
Re: ARC IN-1049AC
Posted: Sun Oct 20, 2013 8:04 pm
by GAHorn
It's an obsolete VHF (Very High Frequency) Omnirange Bearing Selector and Course Deviation Indicator, bluElder.
