Page 1 of 1

Oil Screen Threads

Posted: Sat Dec 07, 2013 2:50 pm
by Andre_C
Would anyone know the thread size for the large oil screen in the accessory case?

Re: Oil Screen Threads

Posted: Sat Dec 07, 2013 9:08 pm
by n2582d
The threads on my F&M oil filter adapter measure 1 3/4" X 16. If you're planning on cleaning the threads F&M loans out a thread chaser. Search "thread chaser" (with quotation marks) at the top of the screen for further information.

Re: Oil Screen Threads

Posted: Mon Dec 09, 2013 4:35 am
by Andre_C
Thanks for the quick reply. We have the best group of people in this club. :D

I was installing my F&M filter and ran into the adapter cutting threads into the sides of the accessory case. I ordered a tap to chase the threads.

After I'm finished, I was thinking about donating the tap to the 170 Association members to help anyone that runs into the same problem.

Thanks again!!!

Re: Oil Screen Threads

Posted: Mon Dec 09, 2013 6:47 am
by GAHorn
Andre, ... that's a really sweet and generous idea (donating a tool after you're finished with it.)

I've made several efforts to create a "tool lending library" and each came to nought. The shipping and return-shipping costs belay the advantage of simply owning or borrowing the tool locally.
Then there's the matter of securing the tool with a deposit to ensure the return.
Then there's the matter of a timely return so the next person can use it.
Then there's the matter of receiving the returned tool in a CLEAN and undamaged state.

Shamefully... the idea withered on the vine due to lack of interest. :(

Perhaps an expensive tool might work in such a scheme, I thought.

Nope. The tool was "lost" and postal insurance will not cover used tools, only new items with proof-of-purchase, and even then the insurance only coves the shipper...not the owner. :?

Again, thanks for the thought, however!