Page 1 of 1
Bent main landing gear on single engine 337 Cessna
Posted: Wed Oct 29, 2014 2:12 pm
by Metal Master
Attached is a link to a Cessna video I received via my Cessna support subscription. It is real short
http://www.youtube.com/watch?v=O8e_f6SW ... e=youtu.be
Re: Bent main landing gear on single engine 337 Cessna
Posted: Sat Nov 01, 2014 12:23 am
by blueldr
The title of this thread really had my attention. I was intrigued by the "Cessna single engine 337" ( I find that they mean '"Single engine OR 337". )
Re: Bent main landing gear on single engine 337 Cessna
Posted: Sat Nov 01, 2014 1:17 pm
by Metal Master
blueldr wrote:The title of this thread really had my attention. I was intrigued by the "Cessna single engine 337" ( I find that they mean '"Single engine OR 337". )
yes
Re: Bent main landing gear on single engine 337 Cessna
Posted: Sat Nov 01, 2014 3:19 pm
by edbooth
There was a company in Kalispell, MT that removed the rear engine on the Skymasters, beefed up the front of the fuselage and installed a turbine on the nose. Saw this during our convention there.
Re: Bent main landing gear on single engine 337 Cessna
Posted: Sat Nov 01, 2014 9:11 pm
by GAHorn
They should have kept the rear engine and converted the front to baggage and radome.