Page 1 of 1
170/170A Flap dimension
Posted: Mon Mar 28, 2016 3:16 pm
by Poncho73
Guys my 1948 170 is in storage and I need to order the "bulbed" style trail edge stiffener. Would someone be able to get me the actual width of the 170 flap, not a B model but the 170.
Spruce have the 79.5" and 116" available, I just want to make sure prior to ordering.
Thanks Dave
Re: 170/170A Flap dimension
Posted: Mon Mar 28, 2016 4:30 pm
by 48RagwingPilot
Dave,
I'll measure mine after work, but hopefully someone will chime in before then.
Dave
Re: 170/170A Flap dimension
Posted: Mon Mar 28, 2016 5:45 pm
by Bruce Fenstermacher
Poncho, the 170A flap is NOT the same as a 170 flap. And as you know neither are the same as a 170B flap.
Re: 170/170A Flap dimension
Posted: Tue Mar 29, 2016 3:45 pm
by 48RagwingPilot
The length of the flap on my '48 C170 is 97.25". Hope this helps.
Re: 170/170A Flap dimension
Posted: Fri Apr 01, 2016 12:26 am
by Poncho73
48RagwingPilot wrote:The length of the flap on my '48 C170 is 97.25". Hope this helps.
Yes, that's it. Anyone have the trailing edge beaded stiffener available. I need the left and right sides
Re: 170/170A Flap dimension
Posted: Fri Apr 01, 2016 5:50 pm
by Poncho73
Just ordered the trailing edge from Wag.