Page 1 of 1

McCauley prop question

Posted: Thu May 11, 2017 8:35 pm
by rickyricky2
Hi All
Does anyone know the correct distance from the blade tip to center of the old McCauley brand sticker?
I am guessing the up blade the sticker is right-side up, and the down blade it is up-side down.

Thanks
Dick Bryant
N2704C

Re: McCauley prop question

Posted: Fri May 12, 2017 1:51 pm
by bsdunek
I put mine on half way out. Not sure if that's where they were, but they look good. The old ones were long gone. They are upright on the right side (of the plane - down blade and inverted on the left side - up blade).

Re: McCauley prop question

Posted: Sat May 13, 2017 2:30 am
by G280driver
if you can wait another day I'll post a picture with a tape measure showing distance from the tip. I can confirm that mine also is right side up on the down blade and the opposite at the other end.

Re: McCauley prop question

Posted: Sat May 13, 2017 3:55 am
by rickyricky2
Thanks
I can wait

Dick Bryant
N2704C

Re: McCauley prop question

Posted: Sat May 13, 2017 3:12 pm
by G280driver
Here are a couple pics.