Page 1 of 1
Excellent Video about cylinders and valves
Posted: Tue Jul 13, 2021 4:54 am
by GAHorn
This is one of the better vids I’ve seen demonstrating boroscoping cyls and valves.
https://www.youtube.com/watch?v=Dk5o4__0y-4
Re: Excellent Video about cylinders and valves
Posted: Wed Jul 14, 2021 2:32 pm
by lowNslow
Yes, this is actually better than the other one you posted. Thanks again George.
Re: Excellent Video about cylinders and valves
Posted: Wed Jul 14, 2021 2:51 pm
by DaveF
Borescoping. You’re scoping a bore.
Sorry if I’m a bore to care about spelling.
Re: Excellent Video about cylinders and valves
Posted: Wed Jul 14, 2021 7:18 pm
by johneeb
Excellent video, learned a lot with this one, thanks George.
Re: Excellent Video about cylinders and valves
Posted: Wed Jul 14, 2021 10:09 pm
by c170b53
The more you do it the better you will get, the limitation is really the equipment. Boro of a cylinder is easy, unlikely you will get lost maybe interpreting the results a bit harder. Resolution is everything.
Re: Excellent Video about cylinders and valves
Posted: Thu Jul 15, 2021 3:08 am
by DaveF
c170b53 wrote:Boro of a cylinder is easy
Come on, Jim, help me out here!
Bor
escope
Bor
escope
Bor
escope