Page 1 of 1
Axle ID??
Posted: Tue Nov 23, 2004 2:54 am
by N419A
I bought a 170 that came with a box of spare parts, of which was a bunch of axles, of corse no two were alike. All have been identified except one which i thought was a stock hollow aluminum axle. Except the part number stamped on the axle does not match any cessna numbers that I have found. Some numbers are rubbed but pretty sure these are them.
0541168 4977
2011T6KAE GA14
Any info is appreciated. Thanks, Paul K.
Posted: Tue Nov 23, 2004 5:54 am
by zero.one.victor
My IPC is at the hangar, but that first number looks like a Cessna number to me. At least the first group of digits (0541168) -- the second group (4977) doesn't look like it belongs.
Eric
Posted: Tue Nov 23, 2004 7:53 am
by N419A
Ya, the solid aluminum is 0541124-1 have one of those, and the heavey steel ski axle is 0741103. The 0541168 is fairly identifiable the 497 ok the last 7 not to sure on. The lower alpha numeric is probaly casting info. I think. I stumped the local cessna dealer or at least over the phone I'm gona drop it by tommarrow. But any info. is more than what I have. So, thank again.
Posted: Sat Nov 27, 2004 1:35 am
by N419A
Found out this axle is a 182 axle this axle or number was discontinued in '59'.