Page 1 of 1
What size fuse?
Posted: Tue Feb 07, 2006 11:56 pm
by N2229D
Can anyone tell me what size fuse should be protecting the SouthWind heater? Mine is un-marked and I want to make sure I mark it with the correct size as well as make sure the right one is in there.
Thanks, Terry.
Posted: Wed Feb 08, 2006 12:07 am
by lowNslow
Terry, don't know about the Southwind heater, but the Stewart-Warner heater is wired with #14 wire and has a 20A fuse.
Posted: Sat Feb 11, 2006 5:34 pm
by GAHorn
The model 979-B1 SouthWind heater was manufactured by Stewart-Warner and is the same heater. It uses 14 ga wire and 20 A fuse.