Page 1 of 1
Altimeter, 6 O'Clock adjusting knob
Posted: Tue Aug 07, 2007 7:52 pm
by N2356D
Does any body know where I can get an altimeter with a 6 O'Clock adjusting knob, or in the alternative where I can get mine overhauled?
Thanks,
Bernie Steadman
860.536.7809
Posted: Tue Aug 07, 2007 8:14 pm
by Bruce Fenstermacher
I would call Keystone Instruments in Lockhaven Pa.
http://www.keystoneinstruments.com/
This from a GAHORN post:
(I'd call a couple overhaul shops like Genuine Aircraft Instruments or Capitol Instruments in Wichita, or Rudy's in Arkansas, if I were looking for low-priced quality equpment (my own, - repaired.)
By the way,... now is the time to ask them to put a Cessna logo in the face if you want it...probably no additional cost.
Aircraft Quality Instruments Inc
2649 S Custer Ave
Wichita, KS 67217
(316) 942-9933
RUDY AIRCRAFT INSTRUMENTS, INC.
4711 Old Bowman Rd.
Rudy, ARK 72952.
(479) 474-8759
AIR CAPITAL INSTRUMENTS
3535 W 30 ST S, #2
WICHITA, KS 67217
_________________