Page 1 of 1
Lower instrument panel covers A model and 1952 B model
Posted: Tue Aug 14, 2007 2:16 am
by sgrimsley2717
I am trying to contact a club member who was interested in the extra set of original lower instrument covers and glove box door that I have. I lost the email messages and don't remember the name except that it was Bruce Fenstermacher who referred the person to me. Bruce doesn't remember either. The last contact was back in January. If you are still out there please send another message. Thanks, steve grimsley
Posted: Wed Aug 15, 2007 12:13 pm
by bsdunek
Hello Steve,
If the person that asked for these doesn't respond in a reasonable amount of time, I might be interested.
I am planning an avionics upgrade this winter, and my left lower panel has quite a large cut-out. If yours is smaller, it would be easier to make things look good.
Please let me know when/if the original person doesn't respond.
Thanks,
4stripes still looking
Posted: Wed Aug 15, 2007 3:28 pm
by 4stripes
Hello
I had posted on this forum looking for those parts (with no luck). I need a correct glove box door (with hinges) and pilot side panel cover (removed by previous owner for radio panel expansion).
My 1952 panel is complete with those exceptions. I appreciate you posting this thread.
Thanks Eric Klepsch
listed in trademart
Posted: Wed Aug 15, 2007 3:37 pm
by 4stripes
My post was in the "trademart" but it appears that the post was deleted. There are only 2 pages of listings now... must be the forum moderators making room???
Cheers Eric
Re: listed in trademart
Posted: Wed Aug 15, 2007 7:15 pm
by cessna170bdriver
4stripes wrote:My post was in the "trademart" but it appears that the post was deleted. There are only 2 pages of listings now... must be the forum moderators making room???
Cheers Eric
All ads over 6 months old are removed:
http://cessna170.org/phpBB2/viewtopic.php?t=5
Posted: Wed Aug 15, 2007 7:51 pm
by Bruce Fenstermacher
Steve, Eric this is probably why we/I couldn't find it.
Darn moderators.
