tail section measurements

How to keep the Cessna 170 flying and airworthy.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
jon s blocker
Posts: 217
Joined: Tue Apr 23, 2002 1:56 pm

tail section measurements

Post by jon s blocker »

I am converting my tail wheel steering system on my 53B model, to that of a 55B model, and desperately need a couple of measurements. I need the measurements of slots the cables go through on the belly of the plane, and the measurements for the location of those slots. If anyone who has a 55B model would be so kind as to help me out, i would greatly appreciate it! I can be contacted at jb57tub@yahoo.com.
Top
User avatar
GAHorn
Posts: 21290
Joined: Fri Apr 12, 2002 8:45 pm

Post by GAHorn »

Jon, why are you going to this expense and trouble?
Top
zero.one.victor
Posts: 2271
Joined: Tue Apr 23, 2002 12:11 am

Post by zero.one.victor »

Yeah,Jon,brake pads are cheap! More parts and monkey-motion to go haywire on the later set-up,too!

Eric
Top
Post Reply

Return to “The Hangar”

Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.