Page 1 of 1
hangar doors
Posted: Mon Jun 22, 2009 4:04 pm
by christopher merker
I am considering buying an old hanger with heavy clumsy steel framed doors. I need to consider door options prior to purchase. Outside sliders are NOT an option. The hanger measures 39'6" between the 6" posts. Is there a rap around door that would fit inside the hanger and still give room for the wings?
merk
Re: hanger doors
Posted: Mon Jun 22, 2009 7:03 pm
by 4-Shipp
Merk,
Check out these two threads. I built my door last year (a very close copy of George's) and could not be happier. My situation sounds very similar to yours, as I built my door inside an existing building with nearly identical measurements. When I built my door steel was $0.50 pound and everything cost around $2K. I did all the welding and fabrication myself so no labor costs were incurred. Good luck.
Bruce
http://www.cessna170.org/forums/viewtop ... 434#p37434
http://www.cessna170.org/forums/viewtop ... oor#p45535