by lowNslow » Fri Dec 11, 2020 4:41 pm
I ran across an article on the El Reno, F&M, Tempest Oil Filter Adaptor from the NTSB about loss of oil resulting in engine failure on adaptors with the fiber gaskets. I then found this document from Stratus Tools Technologies (manufacture or the adaptors) that tells you to replace the fiber gasket with a copper gasket which these units originally used when they first came out. This is an update to a previous document they came out with in December 2019 which just required that you inspect the fiber gasket.
- Attachments
-
STRATUS-ICA-OIL-FILTER-ADAPTERS-Rev.-B-030520.pdf
- (538.79 KiB) Downloaded 42 times
Karl
'53 170B N3158B SN:25400
ASW-20BL